Difference between revisions of "Pulse Server"
From Zenitel Wiki
| Line 1: | Line 1: | ||
{{P}} | {{P}} | ||
One of the intercom stations in a Pulse system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any [[:Category:Stations|IP Intercom station]] can be a Pulse Server. There must be only one Pulse Server in the installation. | One of the intercom stations in a Pulse system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any [[:Category:Stations|IP Intercom station]] can be a Pulse Server. There must be only one Pulse Server in the installation. | ||
| − | |||
| − | |||
The Pulse Server must have a '''static IP address''' (not dynamically assigned via DHCP). | The Pulse Server must have a '''static IP address''' (not dynamically assigned via DHCP). | ||
[[Category: Pulse - Features]] | [[Category: Pulse - Features]] | ||
Revision as of 16:06, 23 June 2017
One of the intercom stations in a Pulse system must be set as the Pulse Server. The Pulse Server is acting as a server for the other intercom stations in the system. Any IP Intercom station can be a Pulse Server. There must be only one Pulse Server in the installation.
The Pulse Server must have a static IP address (not dynamically assigned via DHCP).