Actions

Pulse Server

From Zenitel Wiki

Revision as of 15:23, 10 January 2017 by Asle (talk) (Created page with "One of the intercom stations in a Pulse system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

One of the intercom stations in a Pulse system must be set as the Pulse Server. The Pulse Server is acting as a server for the other intercom stations in the system. Any IP Intercom station can be a Pulse Server. There must be only one Pulse Server in the installation.

Note that you get extended functionality when using a Turbine station with firmware 4.2 or higher as Pulse Server.

The Pulse Server must have a static IP address (not dynamically assigned via DHCP).

Retrieved from "https://wiki.zenitel.com/w/index.php?title=Pulse_Server&oldid=150520"