Difference between revisions of "Quality of Service"
From Zenitel Wiki
(New page: QoS is set on all audio packages (UDP port 61000:61150) using Diffserv bit class EF (http://en.wikipedia.org/wiki/DiffServ#Expedited_Forwarding_.28EF.29_PHB) The TOS byte in the IP header...) |
|||
| Line 1: | Line 1: | ||
QoS is set on all audio packages (UDP port 61000:61150) using Diffserv bit class EF (http://en.wikipedia.org/wiki/DiffServ#Expedited_Forwarding_.28EF.29_PHB) | QoS is set on all audio packages (UDP port 61000:61150) using Diffserv bit class EF (http://en.wikipedia.org/wiki/DiffServ#Expedited_Forwarding_.28EF.29_PHB) | ||
| − | The TOS byte in the IP header is set to DSCP (Diffserv) | + | The TOS byte in the IP header is set to DSCP (Diffserv) (http://en.wikipedia.org/wiki/Type_of_Service) |
Revision as of 15:35, 31 July 2008
QoS is set on all audio packages (UDP port 61000:61150) using Diffserv bit class EF (http://en.wikipedia.org/wiki/DiffServ#Expedited_Forwarding_.28EF.29_PHB)
The TOS byte in the IP header is set to DSCP (Diffserv) (http://en.wikipedia.org/wiki/Type_of_Service)
The Linux console must be used to check if QoS is active: # iptables –t mangle –L –v
To change QoS settings: # nano /opt/amc/scripts/networking
The following lines configures QoS:
- set DSCP class EF on all outgoing VoIP packages iptables -t mangle -A OUTPUT --protocol udp --destination-port 61000:61150 -j DSCP --set-dscp-class EF
( I recommend not to change anything unless knowing what you do.......)
Also:
The rule: ”udp dpts:61000:61150 DSCP set 0x2e” on the chain “OUTPUT” tells the linux kernel to set the DSCP field in the IP-header to hex 0x2e for all outgoing UDP packets within the port range 61000:61150. You can from the iptables command read out the number of packages and bytes this rule has been applied to.
The DSCP value 0x2e is also called Expedited Forwarding (EF). For details on the bits of the DSCP field in the IP header see: http://www.cisco.com/warp/public/105/dscpvalues.html