SET CALL REQ MODE
From Zenitel Wiki
Revision as of 13:30, 14 June 2007 by 10.5.101.115 (talk) (New page: {| border="1" align=left |- !style="background:#ffdead;" width="90pt" colspan="2"|SET_CALL_REQ_MODE !style="background:#ffdead;" width="100pt"|0x006C !style="background:#ffdead;" width="3...)
Turn on/off message "your call is registered, please wait", then ring/flashing at a station. Note that the station leaves this mode if becomes busy for some reason (dialing, incoming conv.<br\>"Call requester mode" is normally used to inform the user about a successful activation of call request.
| SET_CALL_REQ_MODE | 0x006C | 108 | AMC 07.00 | |
|---|---|---|---|---|
| $SCRM L101 L102 U0 U1 | ||||
| 1 | NET_OBJ_REF<br\>{ECL_STATION} | Station | ||
| 2 | NET_OBJ_REF<br\>{ECL_STATION} | Station that received the call request mail (i.e. sender of this command) | ||
| 3 | NET_OBJ_REF | Extra parameter (time/data/phone number) in DIGIT_STRING format or Null if no parameter. | ||
| 4 | TEXT16 | Absence Message as Text. All spaces if Present (no message). | ||
| Response: | ALARM_MSG_ACK | |||