Latest revision as of 11:37, 8 July 2022

General

This article describes how you can override the voice-operated duplex (VOX), and set the system in Simplex (Press To Talk) mode.

Software requirement: AMC 10.52 or newer.

Whole Exchange in Simplex Mode

This event will set the whole exchange in simplex (Press To Talk) mode. Simplex mode will also work across AlphaNet.

In AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:

Event that sets the whole exchange in simplex mode

Action commands:

@U%2.nod $SIMP L%2.dir U0 U1

Initial speech direction will be from B-subscriber towards A-subscriber.

If the Simplex mode should not apply to the whole exchange, but to a single station or a limited group of stations only, simply change the owner of the event to that single station, or include the relevant stations in an UDP group and set this UDP group as event owner.

@@ Line 1: / Line 1: @@
-See also ACDP command [[SET_SIMPLEX]]
+{{AI}}
 =General=
-This article describes how you can override the voice-operated duplex (VOX), and have a fixed (Simplex) speech direction. Two applications are described.<br\>
+This article describes how you can override the voice-operated duplex (VOX), and set the system in Simplex (Press To Talk) mode.
-The first one describes how the whole exchange can be set in permanent simplex mode.<br\>
-The second one describes how calls from a master station can be programmed to have initial speech direction from the called station towards the master station.<br\>
 Software requirement: ''AMC 10.52'' or newer.
 =Whole Exchange in Simplex Mode=
+This event will set the whole exchange in simplex (Press To Talk) mode. Simplex mode will also work across AlphaNet.
-This event will set the whole exchange in simplex mode (will also work in AlphaNet):
+In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event:
-*Owner: UDP 8
+[[File:Simplex.PNG|thumb|left|500px|Event that sets the whole exchange in simplex mode]]
-*Event Type: Conversation Outgoing
+<br style="clear:both;" />
-*When Change To: ON
-*When Related To: All
-*Action: @U%2.nod [[$SET_SIMPLEX]] L%2.dir U0 U1
-=Initial Speech Direction B to A=
-When a Master station calls a [[Substation]] it is often required that the conversation should have a fixed speech direction from the substation towards the master station.<br\>
-By using the AlphaCom [[Event Handler]], it is possible to force the M-key on the B-subscriber ON when the conversation starts, and release the M-key when the conversation cancels. This will force the initial speech direction to be from the substation towards the master station. By operating the M-key, the master can override the speech direction. (In AlphaCom, the last one who is pressing the M-key will get the speech direction). If the master makes a short M-key press the conversation will turn to voice switched duplex.
-==Programming==
-In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events:
-------------
-'''Event 1''' -
-{|
-|-
-|width="100pt"|'''Event Owner''':
-|width="400pt"|The Master Station (or a [[UDP group]] of stations
-|-
-|'''Event type''': || [[Conversation Outgoing (Event Type)|08 - Conversation - Outgoing]]
-|-
-|'''Subevent''': || 0
-|-
-|'''When change to''': || ON
-|-
-|'''When related to''': || All
-|-
-|'''Action''': || [[PAUSE]]
-|-
-| &nbsp; || [[M KEY|$M]] L%2.dir
-|-
-|}
----------------
-'''Event 2''' -
-{|
-|-
-|width="100pt"|'''Event Owner''':
-|width="400pt"|The Master Station (or a [[UDP group]] of stations
-|-
-|'''Event type''': || [[Conversation Outgoing (Event Type)|08 - Conversation - Outgoing]]
-|-
-|'''Subevent''': || 0
-|-
-|'''When change to''': || OFF
-|-
-|'''When related to''': || All
-|-
-|'''Action''': || [[PAUSE]]
-|-
-| &nbsp; || [[M KEY RELEASE|$MREL]] L%2.dir
-|-
-|}
----------------
-If there are several stations to have initial speech direction set, one can use a [[UDP group]] as Event Owner.
+{{Code2|
+ @U%2.nod [[SET_SIMPLEX|$SIMP]] L%2.dir U0 U1
+}}
-[[Image:Simplex Conversation_Option – Use of UDP Groups.jpg|center|300px|thumb]]
+Initial speech direction will be from B-subscriber towards A-subscriber.
-A [[UDP group]] is set as Owner of an event by selecting ''Exchange & System -> Events - >'' “Insert”. Now change the “Owner Type” to Station w. UDP. The ID field specifies which UDP group.
+If the Simplex mode should not apply to the whole exchange, but to a single station or a limited group of stations only, simply change the owner of the event to that single station, or include the relevant stations in an [[UDP|UDP group]] and set this UDP group as event owner.
-[[Image:Simplex Conversation_Option – Use of UDP Groups2.jpg|center|300px|thumb]]
-<br\>
-[[Category:Applications]]
+[[Category:AlphaCom Applications]]
+[[Category: ICX-AlphaCom Applications]]
+[[Category:Applications using Event Handler]]

Difference between revisions of "Simplex conversation (Event Handler)"

From Zenitel Wiki

Latest revision as of 11:37, 8 July 2022

General

Whole Exchange in Simplex Mode