Actions

Difference between revisions of "Software Upgrade (Edge)"

From Zenitel Wiki

Line 6: Line 6:
 
Contact [mailto:support.usa@zenitel.com?Subject=Software%20for%20IC-EDGE%20System support.usa@zenitel.com] to get the latest software version for Edge devices.
 
Contact [mailto:support.usa@zenitel.com?Subject=Software%20for%20IC-EDGE%20System support.usa@zenitel.com] to get the latest software version for Edge devices.
  
{{obs|'''After havoing upgraded from version 4.x to version 5.x, a factory default must be done for all new features to take effect''' }}
+
{{obs|'''After having upgraded from version 4.x to version 5.x, a factory default must be done for all new features to take effect''' }}
  
 
== Upgrade using the VS-IMT tool ==
 
== Upgrade using the VS-IMT tool ==

Revision as of 08:09, 25 April 2019

Edge-icon.jpg

The software of the Vingtor-Stentofon devices in an IC-EDGE System can be mass upgraded in two ways. Either:

  • by using the VS-IMT tool
  • from the Edge Controller

Contact support.usa@zenitel.com to get the latest software version for Edge devices.

OBS icon After having upgraded from version 4.x to version 5.x, a factory default must be done for all new features to take effect


Upgrade using the VS-IMT tool

For a detailed procedure, see the VS-IMT Upgrade Stations


Upgrade from the Edge Controller

Prerequisites

  1. A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
  2. Unzip the software package and store the files in a folder on your laptop.
  3. The firewall on the laptop must not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)


Upgrade procedure

  • Start the TFTP server program and click Browse, and select the folder where the software files are located
TFTP Server - Browse to the folder where the software files are located


  • Start a web browser (e.g. Firefox or Chrome), and Log on to the Edge Controller. Select Edge Controller > Software Upgrade
  • Enter the IP address of the TFTP server (I.e. the IP address of your laptop)
  • Enter the Image File name, e.g vsft-5.0.3.0
  • When updating INCA devices, also a Checksum must be entered. Leave the Checksum field blank when upgrading Turbine devices.
    • The checksum is found in a text file in the software folder, e.g. "A100G80200.03_0_3_0.txt". Open this file and make a note of (or copy to the clipboard) the checksum.
  • Select which stations to upgrade, and click Upgrade.
Enter TFTP server, firmware and check which stations to upgrade


The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.

OBS icon Do not unplug devices during the upgrade!


Note icon If video is not working after having upgraded the Turbine Video Station TCIV-x, see article TCIV - No video after upgrading