Actions

Difference between revisions of "Software Upgrade (Edge)"

From Zenitel Wiki

Line 31: Line 31:
 
* Select which stations to upgrade, and click '''Upgrade'''.
 
* Select which stations to upgrade, and click '''Upgrade'''.
  
[[File:Edge SoftwareUpgrade.PNG|thumb|left|700px|Enter TFTP server, firmware and check which stations to upgrade]]
+
[[File:Edge SoftwareUpgrade.PNG|thumb|left|700px|Enter TFTP server, firmware name and check which stations to upgrade]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
Line 38: Line 38:
 
{{obs|
 
{{obs|
 
* ''Do not unplug devices during the upgrade!''
 
* ''Do not unplug devices during the upgrade!''
 +
* ''It is recommended to use the same software version in all devices''
 
* ''After having upgraded [[:Category:Stations#Turbine_stations|Turbine devices]] from version 4.x to version 5.x, a factory default is recommended for all new settings and features to take effect''
 
* ''After having upgraded [[:Category:Stations#Turbine_stations|Turbine devices]] from version 4.x to version 5.x, a factory default is recommended for all new settings and features to take effect''
 
* ''After having upgraded [[:Category:Stations#INCA_stations|INCA devices]] from version 2.x to version 3.x,  a factory default is recommended for all new settings and features to take effect'' }}
 
* ''After having upgraded [[:Category:Stations#INCA_stations|INCA devices]] from version 2.x to version 3.x,  a factory default is recommended for all new settings and features to take effect'' }}

Revision as of 12:05, 25 April 2019

Edge-icon.jpg

The software of the Vingtor-Stentofon devices in an IC-EDGE System can be mass upgraded in two ways. Either:

  • by using the VS-IMT tool
  • from the Edge Controller

Contact support.usa@zenitel.com to get the latest software version for Edge devices.

Upgrade using the VS-IMT tool

For a detailed procedure, see the VS-IMT Upgrade Stations


Upgrade from the Edge Controller

Prerequisites

  1. A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
  2. Unzip the software package and store the files in a folder on your laptop.
  3. The firewall on the laptop must not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)


Upgrade procedure

  • Start the TFTP server program and click Browse, and select the folder where the software files are located
TFTP Server - Browse to the folder where the software files are located


  • Start a web browser (e.g. Firefox or Chrome), and Log on to the Edge Controller. Select Edge Controller > Software Upgrade
  • Enter the IP address of the TFTP server (I.e. the IP address of your laptop)
  • Enter the Image File name, e.g vsft-5.0.3.0
  • When updating INCA devices, also a Checksum must be entered. Leave the Checksum field blank when upgrading Turbine devices.
    • The checksum is found in a text file in the software folder, e.g. "A100G80200.03_0_3_0.txt". Open this file and make a note of (or copy to the clipboard) the checksum.
  • Select which stations to upgrade, and click Upgrade.
Enter TFTP server, firmware name and check which stations to upgrade


The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.

OBS icon
  • Do not unplug devices during the upgrade!
  • It is recommended to use the same software version in all devices
  • After having upgraded Turbine devices from version 4.x to version 5.x, a factory default is recommended for all new settings and features to take effect
  • After having upgraded INCA devices from version 2.x to version 3.x, a factory default is recommended for all new settings and features to take effect


Note icon If video is not working after having upgraded the Turbine Video Station TCIV-x, see article TCIV - No video after upgrading