Actions

Starting Up Turbine EX Station

From Zenitel Wiki

Revision as of 13:30, 18 October 2016 by Roarl (talk) (Created page with "The Turbine EX Station features an embedded web interface, which allows users to log in via a standard web browser. To start up the station, your PC and the IP station have...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Turbine EX Station features an embedded web interface, which allows users to log in via a standard web browser.

To start up the station, your PC and the IP station have to be connected together via a switch using network cables:

  1. Connect the PC to the switch
  2. Connect the FCDC-2 to the EX station
  3. Connect the FCDC-2 to the switch

When the Turbine Station is connected to the network, the IP address of the station is automatically obtained in one of two ways:

  1. An IP address is obtained from a DHCP server if there is one.
  2. If there is no DHCP server, a random IP address in the range 169.254.x.x will be assigned.

To make the station speak its IP address:

  • Press any button on the station
Note: Speaking IP address is only available when the station is not yet registered

At commissioning, the IP station needs to be configured to enable it to be used as:

  • Station subscribed to an AlphaCom server
  • SIP station
  • Pulse station
Retrieved from "https://wiki.zenitel.com/w/index.php?title=Starting_Up_Turbine_EX_Station&oldid=145276"