Actions

Starting Up Turbine TFIX-V2 Station

From Zenitel Wiki

Revision as of 14:04, 28 January 2022 by Perage (talk | contribs) (Created page with "{{AEIS}}thumb|right|400px|Connecting the PC and the TFIX-V2 station to a network switch The Turbine EX Station (TFIX-V2) features an embedded...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
AEIS.png
Connecting the PC and the TFIX-V2 station to a network switch

The Turbine EX Station (TFIX-V2) features an embedded web interface, which allows users to log in via a standard web browser.

To access the station from your PC, the PC and the TFIX-V2 station have to be connected to a network switch:

  1. Connect the PC to the switch
  2. Connect the Flowire FCDC-3 to the switch
  3. Connect the TFIX-V2 station to the FCDC-3 using two wires
  4. Connect 24-48VDC (48VDC recommended) to the Flowire FCDC-3
  5. The station will now start up
  6. After startup, an IP address is automatically obtained in one of two ways:
    1. An IP address is obtained from a DHCP server if there is one.
    2. If there is no DHCP server, a random IP address in the range 169.254.x.x will be assigned.


How to find the IP Address of the station

If the station is not registered to a server, it will speak its own IP address when you press the Call button, a Digit key or a DAK key on the station

At startup the station is by default set to operate in IC-Edge mode.

During commissioning, the station must be set to operate in the required mode. There are three modes of operation:

  • AlphaCom mode - the station will register to an AlphaCom server
  • SIP mode - the station will regiter to a SIP server
  • IC-Edge mode - the station will register to a IC-Edge server