Actions

Difference between revisions of "State data"

From Zenitel Wiki

 
(9 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
The state data is stored in RAM memory on the AMC-IP, and is backed up by a battery. The battery status is displayed in AlphaWeb, [[AlphaWeb#Node_Information|Node information]].
 
The state data is stored in RAM memory on the AMC-IP, and is backed up by a battery. The battery status is displayed in AlphaWeb, [[AlphaWeb#Node_Information|Node information]].
  
The following station information is stored in the state data:
+
The following information is stored in the state data:
 
* [[Transfer Features|Transfer status]]
 
* [[Transfer Features|Transfer status]]
 
* [[Absence Messages|Absence status]]
 
* [[Absence Messages|Absence status]]
* [[Audio Program]]
+
* [[Audio Program|Audio Program status]]
* [[Simplex conference]]
+
* [[Simplex conference|Simplex conference status]]
* Mail queue
+
* [[Mail Messages|Mail messages and Call Request queue]]
 
* Board/Station/Slave status (up/down/fault)
 
* Board/Station/Slave status (up/down/fault)
* Global Group node members
+
* [[Global Group Call in AlphaNet feature|Global Group node members]]
* RCI block state. (Alarm blocking)
+
* [[Disable alarm input feature|RCI block state]]. (Alarm blocking)
 +
* Backlight setting on IP Stations
 +
* Active volum setting on the IP Stations
 +
* [[Open / Private selection feature|Programable Private/Open]] status
  
  
 
+
[[Category: AMC Software]]
[[Category:AlphaCom E Software]]
 

Latest revision as of 07:16, 8 September 2017

The state data is stored in RAM memory on the AMC-IP, and is backed up by a battery. The battery status is displayed in AlphaWeb, Node information.

The following information is stored in the state data: