Difference between revisions of "TCAS Connections"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| − | [[File:TCAS Connections 1.PNG| | + | [[File:TCAS Connections 1.PNG|thumb|right500px|TCAS substation, rear side]] |
This article describers all Turbine Compact Analog Standard Station connections. | This article describers all Turbine Compact Analog Standard Station connections. | ||
| Line 20: | Line 20: | ||
| − | [[File:WiringAnalogTCAS.png|thumb|left| | + | [[File:WiringAnalogTCAS.png|thumb|left|800px]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 13:20, 16 August 2018
This article describers all Turbine Compact Analog Standard Station connections.
The Turbine analog station has an RJ-45 port and 6 external connectors.
| Power | Draws power from AlphaCom signal line |
| RJ-45 port | AlphaCom connection |
| A, B, C, D wires | AlphaCom connection when RJ-45 port is not used |
Note! Use cables crimped with ferrules for terminal block connectors
To set up the analog station as an intercom:
- 1. Connect the RJ-45 port on the station to the AlphaCom exchange
- 2. Register the station in the AlphaCom exchange
For details on connection at the AlphaCom server side, see ASLT - AlphaCom Subscriber Line Board
Second Call Key
The station is prepared for a future second call key (DAK2).
This second call key can be found on the print if wanted and utilized with an external call button.
- A second external call key must be connected between the A-wire and the lower leg on D6 (highlighted in the image above).