Actions

Difference between revisions of "TCIA-2"

From Zenitel Wiki

(Getting started)
Line 1: Line 1:
 
THIS PAGE IS UNDER CONSTRUCTION
 
THIS PAGE IS UNDER CONSTRUCTION
[[File:TCIA-2 Connection 1.png|thumb|right|500px]]
 
 
 
The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted.
 
The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted.
  
Line 11: Line 9:
  
 
== Connecting the TKIA-2 and TKIS-2 ==
 
== Connecting the TKIA-2 and TKIS-2 ==
 +
[[File:TCIA-2 Connection 1.png|thumb|right|500px]]
 +
 
The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends.
 
The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends.
  

Revision as of 11:07, 22 February 2019

THIS PAGE IS UNDER CONSTRUCTION The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted.


APS.png
Analog over IP Intercom
(100 8113 020)

Getting started

Connecting the TKIA-2 and TKIS-2

TCIA-2 Connection 1.png

The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends.

Using the 8-wire cable, connect the pins on the TKIA-2 to the corresponding pins on the TKIS-2 according to the drawing.

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories