Actions

Difference between revisions of "TCIA-2"

From Zenitel Wiki

(Configuration)
(11 intermediate revisions by 5 users not shown)
Line 1: Line 1:
THIS PAGE IS UNDER CONSTRUCTION
+
The TCIA-2 is an IP based intercom with an analog front board intended for areas where exposure of the physical network is unwanted.
 +
 
 +
The solution is based on a TKIS-2 VoIP kit, where audio and control signals are connected to an interface (TKIA-2), before they are transported to the front unit TCIA-2.
 +
 
 +
{{AEIPS}}[[file:TCAS2.PNG|200px|thumb|Analog over IP Intercom<br>(1008113020)|alt=]]
 +
==Getting started==
 +
 
 +
*[[TKIS Connections|General TKIS connections]]
 +
*[[Starting Up Turbine Station|Starting up]]
 +
 
 +
==Connecting the devices==
 
[[File:TCIA-2 Connection 1.png|thumb|right|500px]]
 
[[File:TCIA-2 Connection 1.png|thumb|right|500px]]
  
The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted.
+
The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends.
  
 +
*Using the 8-wire cable, connect the pins on the TKIA-2 to the corresponding pins on the TKIS-2 according to the drawing.
  
{{APS}}[[file:TCAS2.PNG|right|200px|thumb|Analog over IP Intercom<br>(100 8113 020)]]
+
An FTP cable (maximum 60 meters) is used to connect the TKIA-2 Gateway to the TCIA-2 Intercom.
== Getting started ==
 
* [[TCIS Connections|Connecting your Turbine Intercom station]]
 
* [[Starting Up Turbine Station|Starting up]]
 
  
== Configuration ==
+
*Using the FTP cable, connect the RJ45 port on the TKIA-2 to the RJ45 port on the TCIA-2.
 +
 
 +
==Configuration==
 
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
 
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
* [[Turbine Configuration - AlphaCom mode|AlphaCom mode]]
+
 
* [[SIP Intercom Configuration|SIP mode]]
+
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 +
* [[Adding station to existing system (Edge)|Edge mode]]
 +
* [[SIP Intercom - Web Interface|SIP mode]]
 
* [[IP Station Configuration - Pulse mode|Pulse mode]]
 
* [[IP Station Configuration - Pulse mode|Pulse mode]]
  
== Restore Factory Defaults and Software Upgrade ==
+
Station Specific Configuration:
* [[TCIS Restore Factory Defaults|Restore Factory Defaults]]
+
 
* [[Turbine Software Upgrade|Upgrade via the station web interface]]
+
* [[TCIA-2 Call Button and Station LED|TCIA-2 Call Button and Station LED]]
* [[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
+
 
* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+
==Restore Factory Defaults and Software Upgrade==
 +
 
 +
*[[TKIS Restore Factory Defaults|Restore Factory Defaults]]
 +
*[[Turbine Software Upgrade|Upgrade via the station web interface]]
 +
*[[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
 +
*[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
 +
* [[:Category:IMX28 Release notes|Software Release Notes]]
 +
 
 +
==Connectors, Indicators and Dimensions==
 +
 
 +
*[[Turbine Compact Board Connectors|Board Connections]]
 +
*[[TKIS Indication LEDs|Station Indication LEDs]]
 +
*[[TKIS Dimensions & Mounting Instructions|Dimensions]]
  
== Connectors, Indicators and Dimensions ==
+
==Accessories==
* [[Turbine Compact Board Connectors|Board Connections]]
 
* [[TCIS Indication LEDs|Station Indication LEDs]]
 
* [[TCIS Dimensions & Mounting Instructions|Dimensions]]
 
  
== Accessories ==
 
 
*[[TA-1|TA-1, Turbine Compact Onwall Box - 1008140010]]
 
*[[TA-1|TA-1, Turbine Compact Onwall Box - 1008140010]]
 
*[[TA-2|TA-2, US 2 GANG, Double Depth - 3.5”, Back Box, Masonry - 1008140020]]
 
*[[TA-2|TA-2, US 2 GANG, Double Depth - 3.5”, Back Box, Masonry - 1008140020]]
Line 33: Line 53:
 
*[[TA-14|TA-14 Microphone Windscreen - 1008140140]]
 
*[[TA-14|TA-14 Microphone Windscreen - 1008140140]]
  
 +
==Software Requirements==
 +
This station is fully supported as from AlphaCom version 11.2.3.7
  
 
[[Category: Turbine]]
 
[[Category: Turbine]]

Revision as of 13:41, 30 June 2022

The TCIA-2 is an IP based intercom with an analog front board intended for areas where exposure of the physical network is unwanted.

The solution is based on a TKIS-2 VoIP kit, where audio and control signals are connected to an interface (TKIA-2), before they are transported to the front unit TCIA-2.

AEIPS.png
Analog over IP Intercom
(1008113020)

Getting started

Connecting the devices

TCIA-2 Connection 1.png

The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends.

  • Using the 8-wire cable, connect the pins on the TKIA-2 to the corresponding pins on the TKIS-2 according to the drawing.

An FTP cable (maximum 60 meters) is used to connect the TKIA-2 Gateway to the TCIA-2 Intercom.

  • Using the FTP cable, connect the RJ45 port on the TKIA-2 to the RJ45 port on the TCIA-2.

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Station Specific Configuration:

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as from AlphaCom version 11.2.3.7