Difference between revisions of "TCIS Dimensions & Mounting Instructions"
From Zenitel Wiki
(→TKIS-2 Dimensions) |
(→On-Wall Surface Mount Back Box - TA-1) |
||
| Line 68: | Line 68: | ||
Grommets and an M20 cable gland are provided. | Grommets and an M20 cable gland are provided. | ||
| − | [[File:TCAS Mounting-1.PNG|''Onwall backbox Mounting holes - Side view'']] | + | [[File:TCAS Mounting-1.PNG|200px|''Onwall backbox Mounting holes - Side view'']] |
| − | [[File:TCAS Mounting-2.PNG|''Onwall backbox - Side view'']] | + | [[File:TCAS Mounting-2.PNG|200px|''Onwall backbox - Side view'']] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 10:05, 11 October 2016
| Dimensions (WxHxD) | Weight | Partnumber | |
| TCIS1 | 180 x 120 x 70 mm | 0.8 kg | 1008111010 |
| TCIS1 after flushmount | 180 x 120 x 20 mm | - | - |
| TCIS1 with onwall box | 180 x 120 x 82 mm | - | - |
| TCIS2 | 180 x 120 x 70 mm | 1.0 kg | 1008111020 |
| TCIS2 after flushmount | 180 x 120 x 20 mm | - | - |
| TCIS2 with onwall box | 180 x 120 x 82 mm | - | - |
| TCIS3 | 180 x 120 x 70 mm | 0.8 kg | 1008111030 |
| TCIS3 after flushmount | 180 x 120 x 20 mm | - | - |
| TCIS3 with onwall box | 180 x 120 x 82 mm | - | - |
| TCIS4 | 180 x 120 x 70 mm | 0.8 kg | 1008111030 |
| TCIS4 after flushmount | 180 x 120 x 20 mm | - | - |
| TCIS4 with onwall box | 180 x 120 x 82 mm | - | - |
| TCIS5 | 180 x 120 x 70 mm | 0.8 kg | 1008111030 |
| TCIS5 after flushmount | 180 x 120 x 20 mm | - | - |
| TCIS5 with onwall box | 180 x 120 x 82 mm | - | - |
| TCIS6 | 180 x 120 x 70 mm | 0.8 kg | 1008111030 |
| TCIS6 after flushmount | 180 x 120 x 20 mm | - | - |
| TCIS6 with onwall box | 180 x 120 x 82 mm | - | - |
| TKIS-2 | 65 x 80 x 25 mm | 0.1 kg | 1008131020 |
Contents
TCIS Compact Station Dimensions
TKIS-2 Dimensions
Onwall Surface Mounting
On-Wall Surface Mount Back Box - TA-1
Mounting holes are to be drilled as shown.
Max. recommended screw diameter: ISO M6 or ANSI 1/4". Screw length must be greater than 25 mm or 1". A4 stainless steel socket head screws/bolts are recommended. Max. recommended screw head diameter: 9.5 mm or 3/8".
Optional nylon washers for extra protection against corrosive effects between surfaces are provided. They should be placed at the bottom of the mounting holes. Grommets and an M20 cable gland are provided.
On-Wall Surface Mounting Procedure
- 1. Mount the back box onto the wall
- 2. Fit the gasket onto the back box with the ridged side facing down
- –Plug the Ethernet cable into the RJ-45 port on the station
- 3. Mount the Turbine station onto the back box with the M5 fasteners provided
Note! Use the grommets and M20 cable gland provided for the cable holes on the back box
Flush Mounting
Flush Mount 2-Gang Back Box - TA-3
Note! It is recommended to utilize back boxes with weep holes at the bottom
Flush Mount Bracket - TA-5
Fits US 2-GANG electrical boxes. Recommended screw diameter: up to M4 (5/32"). Use screw recommended by back box manufacurer.
Note! The TA-5 Bracket is mandatory for flush mounting.
Flush Mounting Procedure
- 1. Mount the 2-gang back box into the wall
- 2. Mount the bracket onto the back box
- 3. Fit the gasket onto the bracket with the ridged side facing down
- –Plug the Ethernet cable into the RJ-45 port on the station
- 4. Mount the Turbine station onto the bracket with the M5 fasteners provided