Actions

Difference between revisions of "TCIS Indication LEDs"

From Zenitel Wiki

 
(32 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{APS}}
+
{{AEIPS}}
 
==LEDs on Front Panel==
 
==LEDs on Front Panel==
 
'''Status LEDs'''
 
'''Status LEDs'''
* '''Bell icon''' lights '''yellow''' when a call is placed and ringing
+
 
* '''Talk icon''' lights '''green''' when a call is active and in conversation
+
*'''Bell icon''' lights '''yellow''' when a call is placed and ringing
* '''Door icon''' lights '''red''' when the door is unlocked or relay is active
+
*'''Talk icon''' lights '''green''' when a call is active and in conversation
[[File:TCIS Indications 1.PNG|thumb|300px|left]]
+
*'''Door icon''' lights '''red''' when the door is unlocked or relay is active
 +
 
 +
[[File:TCIS Indications 1.PNG|thumb|300px|left|Bell, Talk and Door icons]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
 +
'''Light in the Call button''':
  
 +
*Steady dim light: Station is successfully registered to the server.
 +
*Flashing light: The station fails to register. Check the network and network cables, and the IP settings and account settings configuration in the station or in the server.
  
'''Talk Icon: Flashing at 1 second intervals:'''<br>
+
==LED indicators on the printed circuit board==
Station has no connection to the server.
+
<gallery mode="traditional" widths="500px" heights="500px" perrow="2">
 
+
File:TCIS-x_LED_Status.png|TCIS and TCIV LED Indication
Possible reasons:
+
File:TCIV+_LED_Status.png|TCIV+ LED Indication
* No connection to Ethernet
+
</gallery>
* Wrong server IP address configured
+
===Power LED===
* Invalid IP address
+
One blue LED indicates if the station receives power.
* No default gateway address or wrong gateway configured
 
  
[[File:TCIS Indications 2.PNG|thumb|100px|left]]
+
*'''Blue LED on''': The station receives power
<br style="clear:both;" />
 
  
 +
===Ethernet status LEDs===
 +
Two LEDs (green and yellow) indicates the status of the ethernet link.
  
'''Talk Icon: Flashing at 5 second intervals:'''<br>
+
*'''Green LED'''
Station has TCP connection to the server, but fail to register.  
+
**Steady light: Ethernet link is OK
 +
**Flashing: Ethernet link is OK, data traffic
 +
**No light: No Ethernet link. Check the ethernet cable and network switch
  
Reason:
+
*'''Yellow LED'''
* Station has not been programmed in AlphaPro
+
**Steady light: 100 Mbit Ethernet connection
 +
**No light: 10 Mbit Ethernet connection
  
[[File:TCIS Indications 3.PNG|thumb|100px|left]]
+
===Registration status LEDs===
<br style="clear:both;" />
 
  
==LED indicators on the printed circuit board ==
+
====Turbine TCIS and TCIV series====
===Power LED on the circuit board ===
+
Two LEDs (green and red) indicates if the station is registered.  
[[File:Turbine PowerLED.png|thumb|300px|left|Power LED]]
 
<br style="clear:both;" />
 
*'''Steady blue light''': The station receives power
 
  
===Registration status LEDs  ===
+
*'''Flashing green''': Station is successfully registered to the server/controller
[[File:TCIS Board Indications 1.png|thumb|300px|left]]
+
*'''Flashing two times red + one time green''' or '''one red + two green''': The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller
<br style="clear:both;" />
 
*'''Flashing 2 red + 1 green''': Station has no connection to the server.
 
*'''Flashing 1 red + 2 green''': Station has TCP connection to the server, but fail to register.
 
*'''Flashing 3 green''': Station connected and registered in the server.
 
  
===Ethernet Activity & Speed LEDs ===
+
====Turbine TCIV+ series====
[[File:TCIS Board Indications 2.png|thumb|300px|left]]
+
Three LEDs (green, yellow and red) indicates if the station is registered. The yellow LED is not in use.  Note that due to the dark housing, the LED's can appear Magenta and White.
<br style="clear:both;" />
 
'''Green LED'''
 
* Steady light: Ethernet connection OK
 
* Flashing: Ethernet data traffic
 
* No light: No Ethernet connection
 
  
'''Yellow LED'''
+
*'''Flashing green''': Station is successfully registered to the server/controller
* Steady light: 100 Mbit Ethernet connection
+
*'''Flashing two times red + one time green''' or '''one red + two green''': The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller
* No light: 10 Mbit Ethernet connection
 
  
[[Category:Turbine Indication LEDs]]
+
[[Category: Station Indication LEDs]]

Latest revision as of 23:15, 17 January 2021

AEIPS.png

LEDs on Front Panel

Status LEDs

  • Bell icon lights yellow when a call is placed and ringing
  • Talk icon lights green when a call is active and in conversation
  • Door icon lights red when the door is unlocked or relay is active
Bell, Talk and Door icons


Light in the Call button:

  • Steady dim light: Station is successfully registered to the server.
  • Flashing light: The station fails to register. Check the network and network cables, and the IP settings and account settings configuration in the station or in the server.

LED indicators on the printed circuit board

Power LED

One blue LED indicates if the station receives power.

  • Blue LED on: The station receives power

Ethernet status LEDs

Two LEDs (green and yellow) indicates the status of the ethernet link.

  • Green LED
    • Steady light: Ethernet link is OK
    • Flashing: Ethernet link is OK, data traffic
    • No light: No Ethernet link. Check the ethernet cable and network switch
  • Yellow LED
    • Steady light: 100 Mbit Ethernet connection
    • No light: 10 Mbit Ethernet connection

Registration status LEDs

Turbine TCIS and TCIV series

Two LEDs (green and red) indicates if the station is registered.

  • Flashing green: Station is successfully registered to the server/controller
  • Flashing two times red + one time green or one red + two green: The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller

Turbine TCIV+ series

Three LEDs (green, yellow and red) indicates if the station is registered. The yellow LED is not in use. Note that due to the dark housing, the LED's can appear Magenta and White.

  • Flashing green: Station is successfully registered to the server/controller
  • Flashing two times red + one time green or one red + two green: The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller