Difference between revisions of "TCIS Indication LEDs"
From Zenitel Wiki
(→Registration status LEDs) |
(→Ethernet status LEDs) |
||
| Line 46: | Line 46: | ||
===Ethernet status LEDs=== | ===Ethernet status LEDs=== | ||
| − | '''Green LED''' | + | *'''Green LED''' |
| − | * Steady light: Ethernet connection OK | + | ** Steady light: Ethernet connection OK |
| − | * Flashing: Ethernet data traffic | + | **Flashing: Ethernet data traffic |
| − | * No light: No Ethernet connection | + | ** No light: No Ethernet connection |
| − | '''Yellow LED''' | + | *'''Yellow LED''' |
| − | * Steady light: 100 Mbit Ethernet connection | + | ** Steady light: 100 Mbit Ethernet connection |
| − | * No light: 10 Mbit Ethernet connection | + | ** No light: 10 Mbit Ethernet connection |
[[Category:Turbine Indication LEDs]] | [[Category:Turbine Indication LEDs]] | ||
Revision as of 12:47, 13 December 2019
Contents
LEDs on Front Panel
Status LEDs
- Bell icon lights yellow when a call is placed and ringing
- Talk icon lights green when a call is active and in conversation
- Door icon lights red when the door is unlocked or relay is active
Talk Icon: Flashing at 1 second intervals:
Station has no connection to the server.
Possible reasons:
- No connection to Ethernet
- Wrong server IP address configured
- Invalid IP address
- No default gateway address or wrong gateway configured
Talk Icon: Flashing at 5 second intervals:
Station has TCP connection to the server, but fail to register.
Reason:
- Station has not been programmed in AlphaPro
LED indicators on the printed circuit board
Power LED
- Steady blue light: The station receives power
Registration status LEDs
Two LEDs (green and red) indicates if the station has network connection (TCP) to the server, and if it is registered.
- Flashing 2 red + 1 green: Station has no TCP connection to the server. Check the network, ethernet cables and IP settings.
- Flashing 1 red + 2 green: Station has TCP connection to the server, but fail to register. Check account settings in the station and server
- Flashing 3 green: Station is successfully registered to the server.
Ethernet status LEDs
- Green LED
- Steady light: Ethernet connection OK
- Flashing: Ethernet data traffic
- No light: No Ethernet connection
- Yellow LED
- Steady light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection