Actions

TCIS Indication LEDs

From Zenitel Wiki

Revision as of 15:27, 9 October 2012 by Roarl (talk) (Created page with "=LEDs on Front Plate= thumb|700px '''<u>Status LEDs</u>''' :- '''Bell icon''' lights '''yellow''' when a call is placed and ringing :- '''Talk ico...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

LEDs on Front Plate

TCIS Indications 1.PNG

Status LEDs

- Bell icon lights yellow when a call is placed and ringing
- Talk icon lights green when a call is active and in conversation
- Door icon lights red when the door is unlocked or relay is active


TCIS Indications 2.PNG

Talk Icon: Flashing at 1 second intervals

- Station has no connection to the AlphaCom server/exchange.
Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom XE IP address configured
- Invalid IP address
- No gateway or wrong gateway to the AlphaCom server/exchange


TCIS Indications 3.PNG

Talk Icon: Flashing at 5 second intervals

- Station connected but NOT registered in the AlphaCom server/exchange.
Reason:
- Station has not been programmed in AlphaPro


TCIS Indications 4.PNG

Status LEDs on PCB

Flashing 2 red + 1 green

- Station has no connection to the AlphaCom server/exchange.

Flashing 1 red + 2 green

- Station connected but NOT registered in the AlphaCom server/exchange.

Flashing 3 green

- Station connected and registered in the AlphaCom server/exchange.


Ethernet Activity & Speed LEDs on PCB

Green LED

- Steady light: Ethernet connection OK
- Flashing: Ethernet data traffic
- No light: No Ethernet connection

Yellow LED

- Steady light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection