Difference between revisions of "TCIS Restore Factory Defaults"
From Zenitel Wiki
| Line 2: | Line 2: | ||
=Reset to Factory Default Settings with Activated DHCP= | =Reset to Factory Default Settings with Activated DHCP= | ||
| − | [[File:TCIS Factory Reset 1.PNG|thumb| | + | [[File:TCIS Factory Reset 1.PNG|thumb|200px|left|Factory Default with IP address from DHCP server]] |
| + | <br style="clear:both;" /> | ||
| + | |||
To reset: | To reset: | ||
:1. While '''pressing any button''', power up the station by connecting to a PoE switch. | :1. While '''pressing any button''', power up the station by connecting to a PoE switch. | ||
| Line 15: | Line 17: | ||
:Password: '''alphaadmin''' | :Password: '''alphaadmin''' | ||
| + | |||
| + | |||
| + | =Reset to Factory Default Settings with Static IP= | ||
| + | [[File:TCIS Factory Reset 2.PNG|thumb|200px|left|Factory Default with Static IP Address]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | |||
| − | |||
To reset: | To reset: | ||
:1. While '''pressing any button''', power up the station by connecting to a PoE switch. | :1. While '''pressing any button''', power up the station by connecting to a PoE switch. | ||
| Line 31: | Line 35: | ||
Password: '''alphaadmin''' | Password: '''alphaadmin''' | ||
| − | + | ||
[[Category:Turbine]] | [[Category:Turbine]] | ||
Revision as of 10:43, 27 October 2015
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
Reset to Factory Default Settings with Activated DHCP
To reset:
- 1. While pressing any button, power up the station by connecting to a PoE switch.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 5 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: (determined by DHCP server)
- Username: admin
- Password: alphaadmin
Reset to Factory Default Settings with Static IP
To reset:
- 1. While pressing any button, power up the station by connecting to a PoE switch.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 3 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values Station IP address: 169.254.1.100 Username: admin Password: alphaadmin