|
|
| (3 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| − | This article describes how to upgrade the software in Turbine Compact IP Standard Stations.
| + | #REDIRECT [[Turbine Software Upgrade]] |
| − | | |
| − | There are two ways of upgrading the software on the IP station:
| |
| − | * Uploading the software via the web interface of the station
| |
| − | * Uploading the software via AlphaWeb on the AlphaCom server
| |
| − | | |
| − | =Prerequisites=
| |
| − | Both upgrade methods require that an TFTP Server is available and that the latest software image files have been downloaded from [[Downloads#Turbine_stations|Downloads]]. During the upgrade process, the IP station will connect to the TFTP Server and download the software. Install the TFTP Server program on your PC which can be downloaded from [[Downloads#Useful Tools|Downloads]]
| |
| − |
| |
| − | =Upgrade Via Station Web Interface=
| |
| − | * Start the TFTP server program and click '''Browse''' to select the folder where the software image files are located
| |
| − | | |
| − | [[File:TCIS Software Upgrade 1.PNG|thumb|left|700px]]
| |
| − | | |
| − | :1. Log on to the IP Station web interface
| |
| − | :2. Select Station Administration> Manual Upgrade
| |
| − | | |
| − | [[File:TCIS Software Upgrade 2.PNG|thumb|left|700px]]
| |
| − | | |
| − | :3. Enter the IP address of the '''TFTP server'''(your PC’s IP address)
| |
| − | :4. Enter the prefix (e.g. '''tsi-3.x.x.x''')to the software image files in the '''Image file''' field
| |
| − | :5. Click '''Save settings''' to store the data
| |
| − | | |
| − | The station will now try to contact the TFTP server. If the connection cannot be established or the ''tftp_test.txt'' file is missing from the folder, the message ''TFTP_CONN_ERROR'' is displayed. If the response is ''TFTP_CONN_OK'' the settings are saved, and the '''Upgrade''' button will appear.
| |
| − | | |
| − | [[File:TCIS Software Upgrade 3.PNG|thumb|left|700px]]
| |
| − | | |
| − | * Click the Upgradebutton to upgrade the software on the IP station.
| |
| − | | |
| − | [[File:TCIS Software Upgrade 4.PNG|thumb|left|700px]]
| |
| − | | |
| − | The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program.
| |
| − | | |
| − | ==Upgrade Via AlphaCom XE==
| |
| − | * Start the TFTP server program and click '''Browse''' to select the folder where the software image files are located
| |
| − | :1. Log on to the AlphaCom web interface AlphaWeb
| |
| − | :2. Select '''System Maintenance -> IP Station Upgrade'''
| |
| − | | |
| − | [[File:TCIS Software Upgrade 5.PNG|thumb|left|700px]]
| |
| − | | |
| − | :3. Enter the '''IP Address''' of the '''TFTP Server'''
| |
| − | :4. Enter the prefix (e.g. '''tsi-3.x.x.x''')to the software image files in the '''Image Name''' field and click '''Save'''
| |
| − | :5. Select the station to upgrade and click '''Update Station List'''
| |
| − | :6. Click '''Start Upgrade Process'''
| |
| − | | |
| − | The AlphaCom XE exchange will tell the station to contact the TFTP server, download the software image files and carry out the upgrade. A short status description of the process will be displayed in the Upgrade status column. The message ''IPST:ERROR'' indicates that there is no connection to the TFTP server, or that the ''tftp_test.txt'' file is missing from the folder. The transfer process can be monitored by selecting the '''Log viewer''' tab in the TFTP server program.
| |
| − | | |
| − | '''''NOTE!''' During an upgrade of the IP station, 802.1X will not be running.''
| |
| − | ''Thus if 802.1X reauthentication is enabled and is performed during the upgrade, the IP station may lose contact''
| |
| − | ''with the TFTP server (depending on the configuration when 802.1X authentication fails).''
| |
| − | ''If the IP station loses contact with the TFTP server, it will not be upgraded.''
| |
| − | | |
| − | [[Category:Turbine]]
| |
