Actions

Difference between revisions of "TCIV+ Software Upgrade"

From Zenitel Wiki

(Created page with "{{AEIS}} This article describes how to upgrade the software of the Turbine TCIV+ series via the '''web interface''' of the station. This process is best suited for upgrading o...")
 
Line 1: Line 1:
 
{{AEIS}}
 
{{AEIS}}
 
This article describes how to upgrade the software of the Turbine TCIV+ series via the '''web interface''' of the station. This process is best suited for upgrading only a few stations.  
 
This article describes how to upgrade the software of the Turbine TCIV+ series via the '''web interface''' of the station. This process is best suited for upgrading only a few stations.  
 +
 +
This article is applicable to the following devices: [[TCIV-2+]], [[TCIV-3+]], [[TCIV-5+]], [[TCIV-6+]] and [[TKIV+]]
  
 
If you want to upgrade Turbine station models TCIV or TCIS go to [[Turbine_Software_Upgrade|Turbine Software Upgrade]]
 
If you want to upgrade Turbine station models TCIV or TCIS go to [[Turbine_Software_Upgrade|Turbine Software Upgrade]]

Revision as of 10:38, 18 May 2021

AEIS.png

This article describes how to upgrade the software of the Turbine TCIV+ series via the web interface of the station. This process is best suited for upgrading only a few stations.

This article is applicable to the following devices: TCIV-2+, TCIV-3+, TCIV-5+, TCIV-6+ and TKIV+

If you want to upgrade Turbine station models TCIV or TCIS go to Turbine Software Upgrade

Note icon For mass upgrade of stations it is recommended to use the VS-IMT tool, see the article VS-IMT Upgrade Stations.


Upgrade procedure

  1. Download the package and store the files in a folder on your PC.
  2. Log on to the Turbine Station web interface. Default login credentials are admin and alphaadmin. Select Station Administration > Manual Upgrade
  3. Drag and drop the software packaged in the Software Update window. Alternatively, you can click inside the Software Update window and browse for the file. The software package will be uploaded. The time it takes to upload will depend on the network connection.
  4. After the software package is uploaded to the station, the same will be used to upgrade the station
  5. When the upgrade process is finished, the station will be rebooted


Software upgrade



Note icon Turbine TCIV+ models have 2 partitions. The upgrade will be done on the partition that is not active.