Difference between revisions of "TCP ports used by AlphaPro"
From Zenitel Wiki
| Line 2: | Line 2: | ||
Depending on server type (AlphaCom XE or ICX-AlphaCom) and the AlphaPro version, AlphaPro is using different TCP ports when communicating with the server. | Depending on server type (AlphaCom XE or ICX-AlphaCom) and the AlphaPro version, AlphaPro is using different TCP ports when communicating with the server. | ||
| + | [['''Reset''' and '''Set Node''' buttons fail]] | ||
== ICX-AlphaCom server == | == ICX-AlphaCom server == | ||
Revision as of 09:15, 8 July 2022
Depending on server type (AlphaCom XE or ICX-AlphaCom) and the AlphaPro version, AlphaPro is using different TCP ports when communicating with the server.
'''Reset''' and '''Set Node''' buttons fail
ICX-AlphaCom server
When using AlphaPro to configure an ICX-AlphaCom system, make sure that Node Type is set to "ICX" in Exchange & System > System:
TCP Ports used:
AlphaCom server
When using AlphaPro to configure an AlphaCom XE system, make sure that Node Type is set to "AlphaCom XE" in Exchange & System > System:
TCP Ports used:
