Actions

TCP ports used by AlphaPro

From Zenitel Wiki

Revision as of 09:15, 8 July 2022 by Asle (talk | contribs)
AI.png

Depending on server type (AlphaCom XE or ICX-AlphaCom) and the AlphaPro version, AlphaPro is using different TCP ports when communicating with the server.

'''Reset''' and '''Set Node''' buttons fail

ICX-AlphaCom server

When using AlphaPro to configure an ICX-AlphaCom system, make sure that Node Type is set to "ICX" in Exchange & System > System:

AlphaPro Type ICX.PNG



TCP Ports used:

AlphaPro TCP ICX.PNG



AlphaCom server

When using AlphaPro to configure an AlphaCom XE system, make sure that Node Type is set to "AlphaCom XE" in Exchange & System > System:

AlphaPro Type XE.PNG



TCP Ports used:

AlphaPro TCP XE.PNG