Actions

Difference between revisions of "TFIX-1-V2"

From Zenitel Wiki

(Configuration)
(Configuration)
Line 27: Line 27:
 
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
 
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
  
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
+
*[[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 
*[[Adding station to existing system (Edge)|Edge mode]]
 
*[[Adding station to existing system (Edge)|Edge mode]]
 
*[[SIP Intercom Configuration|SIP mode]]
 
*[[SIP Intercom Configuration|SIP mode]]

Revision as of 12:00, 31 January 2022

AEIS.png
Turbine Industry - EX
(100 8123 110)


Highlights

  • Ex IP intercom for potentially explosive atmospheres - Directive 2014/34/EU
  • Ethernet compatible 2-wire interface
  • Dust- and water-protected to IP66
  • ONVIF Compatible
  • Visible status indicators on front panel
  • Input power supply 24V-48Vdc SELV approved (48Vdc recommended)
  • Separate amplifier for external loudspeaker (25W/8ohm). 48Vdc input power needed.
  • Signal relay for external beacon (SELV approved power supply needed)
  • 2 freely programmable pot.free inputs


TFIX-V2 Speaker and Beacon



Getting started

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories


Software Requirements

This station is fully supported as form AlphaCom version 11.2.3.11

Related Information