Actions

Difference between revisions of "TFIX-3-V2"

From Zenitel Wiki

Line 1: Line 1:
{{warn|TFIX V2 is supported from software version 6.1.3.0. Do not attempt to downgrade to software below 6.1.3.0!}}
+
 
{{AEIS}}[[file:TFIX-3 Descr.png|thumb|400px|Turbine Industry - EX<br>(1008123130)]]
+
{{AEIS}}{{warn|TFIX V2 is supported from software version 6.1.3.0. Do not attempt to downgrade to software below 6.1.3.0!}}[[file:TFIX-3 Descr.png|thumb|400px|Turbine Industry - EX<br>(1008123130)]]
 
__TOC__
 
__TOC__
  

Revision as of 14:45, 17 August 2022

AEIS.png
Warning icon TFIX V2 is supported from software version 6.1.3.0. Do not attempt to downgrade to software below 6.1.3.0!


Turbine Industry - EX
(1008123130)

Highlights

  • Ex IP intercom for potentially explosive atmospheres - Directive 2014/34/EU
  • Ethernet compatible 2-wire interface
  • Dust- and water-protected to IP66
  • ONVIF Compatible
  • Visible status indicators on front panel
  • Input power supply 24V-48Vdc SELV approved (48Vdc recommended)
  • Separate amplifier for external loudspeaker (25W/8ohm). 48Vdc input power needed.
  • Signal relay for external beacon (SELV approved power supply needed)
  • 2 freely programmable pot.free inputs


TFIX-V2 Speaker and Beacon



Getting started

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as form AlphaCom version 11.2.3.11

Related Information