Difference between revisions of "TFIX Restore Factory Defaults"
From Zenitel Wiki
| Line 7: | Line 7: | ||
<div style="text-align:left;"> <youtube width="300" height="180">6dZHLvSKt_I</youtube> </div> | <div style="text-align:left;"> <youtube width="300" height="180">6dZHLvSKt_I</youtube> </div> | ||
<br><br> | <br><br> | ||
| + | __NOTOC__ | ||
To reset: | To reset: | ||
:1. While '''pressing any button''', power up the station. | :1. While '''pressing any button''', power up the station. | ||
Revision as of 14:34, 15 May 2018
A Turbine EX Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
NOTE! A TFIX Factory Default will also reset the Flowire NMK password. See here for more
Reset to Factory Default Settings with Activated DHCP
To reset:
- 1. While pressing any button, power up the station.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 5 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: (determined by DHCP server)
- Username: admin
- Password: alphaadmin
Reset to Factory Default Settings with Static IP
To reset:
- 1. While pressing any button, power up the station.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 3 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin