Actions

Difference between revisions of "TKIS Restore Factory Defaults"

From Zenitel Wiki

(Reset to Factory Default Settings with Static IP)
(Factory default values)
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
 
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
 +
<div style="text-align:left;"> <youtube width="300" height="180">HD2ysF8Fpio</youtube>  </div>
  
==Preparation==
+
__NOTOC__
 +
== Preparation ==
 
# Connect a loudspeaker (8 ohms or higher) to the speaker output
 
# Connect a loudspeaker (8 ohms or higher) to the speaker output
 
# Connect a push button to input 1
 
# Connect a push button to input 1
Line 7: Line 9:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
==Reset to Factory Default Settings with Activated DHCP==
+
== Reset to Factory Default Settings with Activated DHCP ==
 
To reset:
 
To reset:
 
# While pressing the button, power up the station by connecting to a PoE switch
 
# While pressing the button, power up the station by connecting to a PoE switch
Line 16: Line 18:
  
 
=== Factory default values ===
 
=== Factory default values ===
:Station IP address: (determined by DHCP server)
+
:Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
 
:Username: '''admin'''
 
:Username: '''admin'''
 
:Password: '''alphaadmin'''
 
:Password: '''alphaadmin'''
  
==Reset to Factory Default Settings with Static IP==
+
== Reset to Factory Default Settings with Static IP ==
 
To reset:
 
To reset:
 
# While pressing the button, power up the station by connecting to a PoE switch
 
# While pressing the button, power up the station by connecting to a PoE switch
Line 26: Line 28:
 
# Press and hold the button on '''count 3''' and release on '''count 0'''
 
# Press and hold the button on '''count 3''' and release on '''count 0'''
 
* If there is no 0 count, the procedure has failed and you have to start again
 
* If there is no 0 count, the procedure has failed and you have to start again
* Press the '''call button''', and the station will speak its IP address
+
* Press the '''button''', and the station will speak its IP address
  
 
=== Factory default values ===
 
=== Factory default values ===

Revision as of 09:25, 25 October 2018

A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.


Preparation

  1. Connect a loudspeaker (8 ohms or higher) to the speaker output
  2. Connect a push button to input 1
TKIS2SpeakIP.png


Reset to Factory Default Settings with Activated DHCP

To reset:

  1. While pressing the button, power up the station by connecting to a PoE switch
  2. Hold the button until the station audio starts counting, and release the button on count 1
  3. Press and hold the button on count 5 and release on count 0
  • If there is no 0 count, the procedure has failed and you have to start again
  • Press the button, and the station will speak its IP address

Factory default values

Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
Username: admin
Password: alphaadmin

Reset to Factory Default Settings with Static IP

To reset:

  1. While pressing the button, power up the station by connecting to a PoE switch
  2. Hold the button until the station audio starts counting, and release the button on count 1
  3. Press and hold the button on count 3 and release on count 0
  • If there is no 0 count, the procedure has failed and you have to start again
  • Press the button, and the station will speak its IP address

Factory default values

Station IP address: 169.254.1.100
Username: admin
Password: alphaadmin