Actions

Difference between revisions of "Tamper switch"

From Zenitel Wiki

Line 2: Line 2:
 
== Configuration ==
 
== Configuration ==
 
Create this event for the Tamper Switch:
 
Create this event for the Tamper Switch:
[[file:TamperSwitchEvent.png|500px|thumb|Tamper Switch configuration]]
+
[[file:TamperSwitchEvent.png|500px|thumb|left|Tamper Switch configuration]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  

Revision as of 10:08, 27 March 2020

APS.png
Tamper Switch
(100 8091 010)

Configuration

Create this event for the Tamper Switch:

Tamper Switch configuration


Mounting

Mounting instruction on Tamper Switch for IP Vandal Resistant Substation TKIE

Step 1: Remove the two nylon nuts shown below

Tamper1.png


Step 2: Attach the supplied spacers

Tamper2.png


Step 3: Mount the tamper switch board

Tamper3.png


Step 4: Move the button GND wire from the the TKIE board to the tamper switch board

Tamper4.png


Tamper5.png


Step 5: Use the supplied wires to connect GND and Input 3 as shown below

Tamper6.png