Actions

Difference between revisions of "Temperature Alarm"

From Zenitel Wiki

(New page: ==== Temperature alarm ==== The AlphaCom monitors the temperature of the boards. If the temperature becomes too high, an internal RCI #8 is triggered, and the log event "Temperature Al...)
 
(Temperature alarm)
Line 1: Line 1:
==== Temperature alarm ====
+
==Temperature alarm==
 
The AlphaCom monitors the temperature of the boards. If the temperature becomes too high, an internal [[RCI]] #8 is triggered, and the log event "Temperature Alarm" is generated:
 
The AlphaCom monitors the temperature of the boards. If the temperature becomes too high, an internal [[RCI]] #8 is triggered, and the log event "Temperature Alarm" is generated:
 
  Oct 10 12:54:35 src@Johnson AlphaLog: N001.D065:.Exch:ALARM 8 ON.
 
  Oct 10 12:54:35 src@Johnson AlphaLog: N001.D065:.Exch:ALARM 8 ON.

Revision as of 14:32, 31 July 2009

Temperature alarm

The AlphaCom monitors the temperature of the boards. If the temperature becomes too high, an internal RCI #8 is triggered, and the log event "Temperature Alarm" is generated:

Oct 10 12:54:35 src@Johnson AlphaLog: N001.D065:.Exch:ALARM 8 ON.
Oct 10 12:54:35 src@Johnson AlphaLog: N001.D065:.Exch:Temperature Alarm

In addition a mail is sent to station 1. The mail can be viewed by entering 70 and looks like this:

TemperatureAlarm
0=Clear 8=Call

Known problems AMC hardware 8000/2

"Temperature Alarm" in AlphaCom E7: This problem is probably related to the fact that the AMC-IP board never had a connection to the over-temp. signal from the ACE7 backplane. This is related to the problems with RCIs from the same backplane.