Difference between revisions of "Temperature Alarm (ICX-AlphaCom)"
From Zenitel Wiki
(Created page with "{{I}} ==Temperature alarm== The ICX-AlphaCom monitors the temperature of the motherboard. If the temperature becomes too high, an internal RCI #8 is triggered, and the log...") |
|||
| Line 9: | Line 9: | ||
TemperatureAlarm | TemperatureAlarm | ||
0=Clear 8=Call | 0=Clear 8=Call | ||
| + | |||
[[File:Temp alarm.PNG|thumb|left|700px|Delete ON and OFF action if "Temperature Alarm" should not be reported to station #1, or change the receiver physical number (MST 1 = physical 1)]] | [[File:Temp alarm.PNG|thumb|left|700px|Delete ON and OFF action if "Temperature Alarm" should not be reported to station #1, or change the receiver physical number (MST 1 = physical 1)]] | ||
[[Category: ICX-AlphaCom Applications]] | [[Category: ICX-AlphaCom Applications]] | ||
Latest revision as of 11:06, 8 February 2024
Temperature alarm
The ICX-AlphaCom monitors the temperature of the motherboard. If the temperature becomes too high, an internal RCI #8 is triggered, and the log event "Temperature Alarm" is generated:
Oct 10 12:54:35 src@Johnson AlphaLog: N001.D065:.Exch:ALARM 8 ON. Oct 10 12:54:35 src@Johnson AlphaLog: N001.D065:.Exch:Temperature Alarm
In addition a mail is sent to the station on physical number 1. The mail can be viewed by entering 70 (Station reset) and looks like this:
TemperatureAlarm 0=Clear 8=Call
