Difference between revisions of "Turbine Compact - Image recovery"
From Zenitel Wiki
(→Requirements) |
(→Requirements) |
||
| Line 11: | Line 11: | ||
* The application "Turbine Station Production Upgrade Application" installed on a Windows PC. | * The application "Turbine Station Production Upgrade Application" installed on a Windows PC. | ||
* A serial connection from the PC to the Turbine Compact board, using a USB to Serial cable | * A serial connection from the PC to the Turbine Compact board, using a USB to Serial cable | ||
| + | |||
| + | |||
| + | === The USB to Serial cable === | ||
| + | |||
| + | The Turbine station has a TTL level serial interface which we need to connect to during the upgrade process. For this purpose a USB to Serial converter cable can be used. Recommended cable is http://uk.farnell.com/ftdi/ttl-232r-3v3/cable-usb-to-ttl-level-serial-conv/dp/1329311?Ntt=FTDI+-+TTL-232R-3V3+-+CABLE from Farnell. | ||
Revision as of 12:47, 17 December 2013
This article describes how the flash image of a Turbine Compact station can be recovered.
Before starting the upgrade process it is important to identify if the bootloader is corrupted or not.
- Corrupted bootloader
- The bootloader is intact
Requirements
- The application "Turbine Station Production Upgrade Application" installed on a Windows PC.
- A serial connection from the PC to the Turbine Compact board, using a USB to Serial cable
The USB to Serial cable
The Turbine station has a TTL level serial interface which we need to connect to during the upgrade process. For this purpose a USB to Serial converter cable can be used. Recommended cable is http://uk.farnell.com/ftdi/ttl-232r-3v3/cable-usb-to-ttl-level-serial-conv/dp/1329311?Ntt=FTDI+-+TTL-232R-3V3+-+CABLE from Farnell.