Difference between revisions of "Turbine Test and Demo Application"
From Zenitel Wiki
(→Installations of demo software) |
|||
| Line 11: | Line 11: | ||
Open up TCP port inTurbine IP stastion for demo application | Open up TCP port inTurbine IP stastion for demo application | ||
*Logon to Turbine IP station | *Logon to Turbine IP station | ||
| + | * Set the station in '''SIP Mode''' | ||
*Check the firewall settings in ”Advanced Network”. | *Check the firewall settings in ”Advanced Network”. | ||
*Open up SSH port | *Open up SSH port | ||
| − | * | + | *Enable the Turbine demo application |
| − | |||
| − | |||
== Load media files onto Turbine IP station == | == Load media files onto Turbine IP station == | ||
Revision as of 14:16, 20 September 2012
With the Turbine demo PC Application it is possible to play audio files directly on the station, without the need of any AlphaCom server.
Installations of demo software
To install demo software for your Turbine, the following steps must be taken:
- Open up SSH and TCP port inTurbine IP stastion for demo application
- Load media files onto Turbine IP station
- Install demo application on your PC
- Close SSH port
Open up TCP port inTurbine IP stastion for demo application
- Logon to Turbine IP station
- Set the station in SIP Mode
- Check the firewall settings in ”Advanced Network”.
- Open up SSH port
- Enable the Turbine demo application
Load media files onto Turbine IP station
On the Downloads page you will find a turbine-media-demo_3.0.1.3-2_armel.ipk with wav files to be uploaded and installed in each Turbine station.
- Copy this package to /tmp on target using for example WinSCP. The protocol is SCP. Tool: http://winscp.net/eng/index.php
- Login to the Turbine consol with protocol SSH. Tool: http://www.chiark.greenend.org.uk/~sgtatham/putty/
- Username/password: root/root and do following to install package:
# cd /tmp # ipkg install turbine-media-demo_3.0.1.3-2_armel.ipk
Install demo application on your PC
https://alphasupport.zenitel.com/alphawiki/fileshare/TurbineCommandClient.zip . Extract .zip files and copy software to a suited folder on your PC. No install needed. Just start the exe-file. Double-click inside the station to set IP address of the station, press ”Connect to Turbine Station” and red color should become green. From my experience you might have to reset the PC to make it work. Close SSH port
- Logon to Turbine IP station
- Check the firewall settings in ”Advanced Network”.
- Open up SSH port