Actions

Difference between revisions of "Turbine Video Settings"

From Zenitel Wiki

Line 6: Line 6:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
'''Video Mode'''
+
'''Video Mode''': This parameter defines whether the video stream will be in either of the two modes: '''MJPG''' in http or '''H.264''' in RTP.
* Defines the video stream codec:
+
* Video Mode '''H.264''' is used when the station is in '''SIP''' or '''Pulse''' mode.
# '''MJPG''' (in HTTP) is used in '''AlphaCom''' mode
+
* Video Mode '''MJPG''' is used when the station is in '''AlphaCom''' mode.
# '''H.264''' (in RTP) is used in '''SIP''' or '''Pulse''' mode
 
  
'''Enable Video'''
 
* Enables the internal video camera when checked
 
  
'''Lens distortion correction'''
+
'''Enable Video''': This parameter defines whether calls made from the station will be video calls.
* Enabling this parameter will correct the “fish eye” effect that can occur on the edges of the video image
+
 
 +
'''Lens distortion correction''': Enabling this parameter will correct the “fish eye” effect that can occur on the edges of the video image.
  
 
'''Night mode'''
 
'''Night mode'''

Revision as of 16:20, 12 January 2017

APS.png

To modify the video settings on the station models TCIV-2, TCIV-3 or TCIV-6, log on to the station web interface and select:

  • Advanced AlphaCom > Video (AlphaCom mode), or
  • SIP Configuration > Video Setting (SIP/Pulse mode)

TCIV VideoSettings 1.PNG

Video Mode: This parameter defines whether the video stream will be in either of the two modes: MJPG in http or H.264 in RTP.

  • Video Mode H.264 is used when the station is in SIP or Pulse mode.
  • Video Mode MJPG is used when the station is in AlphaCom mode.


Enable Video: This parameter defines whether calls made from the station will be video calls.

Lens distortion correction: Enabling this parameter will correct the “fish eye” effect that can occur on the edges of the video image.

Night mode

  • Enables night mode when checked

Zoom

  • Select the zoom of the camera. Values are 1x or 2.5x

Offset Left Right [-100 100]

  • Available when zoom is set to more than 1x. Determines the width of the image.

Offset Up-Down [-100 100]

  • Available when zoom is set to more than 1x. Determines the height of the image.

Color saturation [0 255]

  • Adjust the colorfulness of a color relative to its own brightness.

Contrast [0 255]

  • Contrast adjustment.

Brightness [0 255]

  • Brightness adjustment.

Backlight compensation

  • Available values 0-5. Default value = 2.

Camera IP address and port

  • IP address is fixed and equal to the TCIV IP address. The port (default 8090) can be changed.

Resolution and fps

  • Sets pixel resolution and framerate per second.

Enable HTTP basic authentication

  • Requires username and password to fetch video when checked (default admin/alphaadmin).