Actions

Difference between revisions of "Turbine Video Settings"

From Zenitel Wiki

Line 15: Line 15:
 
'''Lens distortion correction''': Enabling this parameter will correct the “fish eye” effect that can occur on the edges of the video image.
 
'''Lens distortion correction''': Enabling this parameter will correct the “fish eye” effect that can occur on the edges of the video image.
  
'''Night mode'''
+
'''Night mode''': Enables night mode when checked
* Enables night mode when checked
 
  
'''Zoom'''
+
'''Zoom''': This parameter sets the digital zoom of the video image. The zoom level range is 1.0 to 2.5. Once it is set higher than 1.0 it allows for offsetting the view horizontally and vertically. The offset range is -100 to 100.
* Select the zoom of the camera. Values are 1x or 2.5x
 
  
'''Offset Left Right [-100 100]'''
+
'''Offset Left Right''': Available when zoom is set to more than 1x. Determines the width of the image.
* Available when zoom is set to more than 1x. Determines the width of the image.
 
  
'''Offset Up-Down [-100 100]'''
+
'''Offset Up-Down'': Available when zoom is set to more than 1x. Determines the height of the image.
* Available when zoom is set to more than 1x. Determines the height of the image.
 
  
'''Color saturation [0 255]'''
+
'''Color saturation''': This parameter sets the color saturation of the video image. The range is from 0 to 255. The default value is 128.
* Adjust the colorfulness of a color relative to its own brightness.
 
  
'''Contrast [0 255]'''
+
'''Contrast [0 255]''': This parameter sets the contrast of the video image. The range is from 0 to 255. The default value is 128.
* Contrast adjustment.
 
  
'''Brightness [0 255]'''
+
'''Brightness [0 255]''': This parameter sets the brightness of the video image. The range is from 0 to 255. The default value is 128.
* Brightness adjustment.
 
  
'''Backlight compensation'''
+
'''Backlight compensation''': This parameter sets the backlight compensation for the video image. The range is from 0 to 5. The default value is 2.
* Available values 0-5. Default value = 2.
 
  
 
'''Camera IP address and port'''
 
'''Camera IP address and port'''

Revision as of 16:23, 12 January 2017

APS.png

To modify the video settings on the station models TCIV-2, TCIV-3 or TCIV-6, log on to the station web interface and select:

  • Advanced AlphaCom > Video (AlphaCom mode), or
  • SIP Configuration > Video Setting (SIP/Pulse mode)

TCIV VideoSettings 1.PNG

Video Mode: This parameter defines whether the video stream will be in either of the two modes: MJPG in http or H.264 in RTP.

  • Video Mode H.264 is used when the station is in SIP or Pulse mode.
  • Video Mode MJPG is used when the station is in AlphaCom mode.


Enable Video: This parameter defines whether calls made from the station will be video calls.

Lens distortion correction: Enabling this parameter will correct the “fish eye” effect that can occur on the edges of the video image.

Night mode: Enables night mode when checked

Zoom: This parameter sets the digital zoom of the video image. The zoom level range is 1.0 to 2.5. Once it is set higher than 1.0 it allows for offsetting the view horizontally and vertically. The offset range is -100 to 100.

Offset Left Right: Available when zoom is set to more than 1x. Determines the width of the image.

'Offset Up-Down: Available when zoom is set to more than 1x. Determines the height of the image.

Color saturation: This parameter sets the color saturation of the video image. The range is from 0 to 255. The default value is 128.

Contrast [0 255]: This parameter sets the contrast of the video image. The range is from 0 to 255. The default value is 128.

Brightness [0 255]: This parameter sets the brightness of the video image. The range is from 0 to 255. The default value is 128.

Backlight compensation: This parameter sets the backlight compensation for the video image. The range is from 0 to 5. The default value is 2.

Camera IP address and port

  • IP address is fixed and equal to the TCIV IP address. The port (default 8090) can be changed.

Resolution and fps

  • Sets pixel resolution and framerate per second.

Enable HTTP basic authentication

  • Requires username and password to fetch video when checked (default admin/alphaadmin).