Difference between revisions of "Turbine Video Settings"
From Zenitel Wiki
| Line 25: | Line 25: | ||
'''Color saturation''': This parameter sets the color saturation of the video image. The range is from 0 to 255. The default value is 128. | '''Color saturation''': This parameter sets the color saturation of the video image. The range is from 0 to 255. The default value is 128. | ||
| − | '''Contrast | + | '''Contrast''': This parameter sets the contrast of the video image. The range is from 0 to 255. The default value is 128. |
| − | '''Brightness | + | '''Brightness''': This parameter sets the brightness of the video image. The range is from 0 to 255. The default value is 128. |
'''Backlight compensation''': This parameter sets the backlight compensation for the video image. The range is from 0 to 5. The default value is 2. | '''Backlight compensation''': This parameter sets the backlight compensation for the video image. The range is from 0 to 5. The default value is 2. | ||
| − | '''Camera IP address and port''' | + | '''Camera IP address and port''': This is the IP address and port number of the camera streaming the video to a web browser or video |
| − | + | display station. '''''The video camera and the Turbine station have the same IP address.''''' | |
| − | '''Resolution and fps''' | + | '''Resolution and fps''': Sets pixel resolution and framerate per second. |
| − | |||
| − | '''Enable HTTP basic authentication''' | + | '''Enable HTTP basic authentication''': Requires username and password to fetch video when checked (default '''admin'''/'''alphaadmin'''). |
| − | |||
[[Category: Turbine Configuration]] | [[Category: Turbine Configuration]] | ||
[[Category: Video]] | [[Category: Video]] | ||
Revision as of 16:25, 12 January 2017
To modify the video settings on the station models TCIV-2, TCIV-3 or TCIV-6, log on to the station web interface and select:
- Advanced AlphaCom > Video (AlphaCom mode), or
- SIP Configuration > Video Setting (SIP/Pulse mode)
Video Mode: This parameter defines whether the video stream will be in either of the two modes: MJPG in http or H.264 in RTP.
- Video Mode H.264 is used when the station is in SIP or Pulse mode.
- Video Mode MJPG is used when the station is in AlphaCom mode.
Enable Video: This parameter defines whether calls made from the station will be video calls.
Lens distortion correction: Enabling this parameter will correct the “fish eye” effect that can occur on the edges of the video image.
Night mode: Enables night mode when checked
Zoom: This parameter sets the digital zoom of the video image. The zoom level range is 1.0 to 2.5. Once it is set higher than 1.0 it allows for offsetting the view horizontally and vertically. The offset range is -100 to 100.
Offset Left Right: Available when zoom is set to more than 1x. Determines the width of the image.
'Offset Up-Down: Available when zoom is set to more than 1x. Determines the height of the image.
Color saturation: This parameter sets the color saturation of the video image. The range is from 0 to 255. The default value is 128.
Contrast: This parameter sets the contrast of the video image. The range is from 0 to 255. The default value is 128.
Brightness: This parameter sets the brightness of the video image. The range is from 0 to 255. The default value is 128.
Backlight compensation: This parameter sets the backlight compensation for the video image. The range is from 0 to 5. The default value is 2.
Camera IP address and port: This is the IP address and port number of the camera streaming the video to a web browser or video display station. The video camera and the Turbine station have the same IP address.
Resolution and fps: Sets pixel resolution and framerate per second.
Enable HTTP basic authentication: Requires username and password to fetch video when checked (default admin/alphaadmin).