View source for VS-Client Installer

{{EP}}
=== Prerequisites === 
Recommended system requirements:

{| border="1"
|-
|Operating System || Windows 7 x86/64, Windows 8 x86/64
|-
|Hardware|| CPU: Dual Core Intel Core or newer<br> 
RAM: 4 GB<br> 
Hard drive: 40 GB or better<br> 
Modern integrated GPU with OpenGL 3.0 support <br> 
Network card
|-
|Audio || Modern soundcard<br>
Speakers and microphone
|-
|USB Button (optional) || USB 2.0 support.
|-
|}

=== License requirements ===
Using the VS-Client in the [[:Category:IC-EDGE_System|IC-Edge system]] is license free, and supported for up to 10 units.

A [[Pulse_Licensing#VS-Client_Extensions|VS-Client Extension license]] (Item no. 1009661101) is required in the [[Pulse Server]], and a VS-Client account must be defined in the Pulse Server in order for the VS-Client to register.
[[File:vs-client-pulse-server.PNG|thumb|400px|left|VS-client account in Pulse Server]]
<br style="clear:both;" />

=== Installation ===
See video:
<div style="text-align:left;"> <youtube width="300" height="180">JMSgYDdNjOg</youtube>  </div>

The VS-Client application includes a Windows Installer package named VingtorStentofonIntercom_1.x.x.x.msi that is used to install VS-Client on the PC (1.x.x.x being the current software version). The installer has a Setup Wizard that will guide the user through the installation procedure.

* Double-Click VingtorStentofonIntercom_1.x.x.x[[File:VSClientInstall1.JPG|none|thumb|499x499px]]
* Click '''Next'''[[File:VSClientInstall2.JPG|none|thumb|499x499px]]
* Check the '''Accept EULA box''' and click '''Next'''[[File:VSClientInstall3.JPG|none|thumb|499x499px]]
* Optionally change the default installation location, and/or select to install optional components:
**'''Vingtor Stentofon ZAP Service''': ZAP (Zenitel Application Protocol) - Configuration and Event Hub. Is automatically started by default. Should only be used with VS-SDK for Pulse.
**'''Vingtor Stentofon Intercom Service''': Intercom (VoIP) Signaling and Audio Processing Module. Disabled by default. Should only be used with VS-SDK for Pulse.

* Click '''Next'''[[File:VSClientInstall4.JPG|none|thumb|499x499px]]
* [[File:VSClientInstall5.JPG|none|thumb|499x499px]]Click '''Install'''<br>
* Click '''Finish''' to complete the installation
Once installed, the VS-Client application will be available in the Start Menu:
* '''All Programs > Vingtor Stentofon > VS-Client'''
The application data is stored under the folder:
* '''C:\ProgramData\Vingtor Stentofon\EdgeAudioClient'''
VS-Client can be removed by running from the Start Menu:
* '''All Programs > Vingtor Stentofon > Uninstall VS-Client'''
[[Category:VS-Client]]