Actions

Difference between revisions of "VSF-Fortitude8 6.2 Release Notes"

From Zenitel Wiki

(VSF-FORTITUDE8 6.1.3.1)
(Issues fixed)
Line 28: Line 28:
  
 
==Issues fixed==
 
==Issues fixed==
=== MTN-3180 IP flush master now only shows 1 relay in configuration===
 
Before there was incorrect option to select up to 3 relays but it is only 1 relay that is actually existing on device.
 
 
 
=== MTN-3334 TLS 1.1. support over https is removed from devices ===  
 
=== MTN-3334 TLS 1.1. support over https is removed from devices ===  
 +
=== MTN-3339 Relays now return states without need to be triggered first ===
  
=== MTN-3343 Set time manually has been fixed for IP Desk Master V2 devices in Edge and SIP mode===
 
 
=== MTN-3352 Issue with headset on IP Desk Master-V2 is now fixed===
 
If headset on the IP Desk Master-V2 was used, the headset would not be detected after use of the handset. This is now fixed.
 
  
=== MTN-3355 The three inputs on the PCB of the IP Desk Master-V2 are now supported===
 
  
  
 
[[Category: Release notes]]
 
[[Category: Release notes]]

Revision as of 09:54, 13 August 2021

Release info

This document provides the release notes for VSF-Fortitude8 6.2 with incremental bug fix releases. The release notes for VSF-Fortitude8 6.2 describe new features, improvements and issues fixed after VSF-Fortitude8 6.1.

Name: VSF-Fortitude8
Description: VSF-Fortitude8 is a firmware for Turbine Video Plus Intercom including the following devices: TCIV-2+, TCIV-3+, TCIV-5+, TCIV-6+ and TKIV+

The firmware is delivered in two different files:

  • vsff8-6.2.3.x - Used for standard in-field upgrades
  • vsff8-prod-6.2.3.x - Used in production- and recovery upgrades.

Version: 6.2.3.0
Date: 30.06.2021
Status: General Availability
Compatibility: Turbine Video Plus intercom is compatible with Edge, SIP, ICX-AlphaCom and AlphaCom systems.


VSF-FORTITUDE8 6.2.3.0

Improvements

RED-46 IPv6 is supported in SIP mode

MTN-3350 ICX-AlphaCom server's IP is now shown in device info menu when device is not connected

If IP address of the ICX-AlphaCom server was configured, but not connected to ICX-AlphaCom server, IP address 0.0.0.0 would show in device info on the device itself. This is now fixed. The IP of the ICX-AlphaCom server is displayed on the device even if it has lost connection to the ICX-AlphaCom server.


Issues fixed

MTN-3334 TLS 1.1. support over https is removed from devices

MTN-3339 Relays now return states without need to be triggered first