Actions

Difference between revisions of "VSF-Fortitude8 6.4 Release Notes"

From Zenitel Wiki

(MTN-3477)
(Known Issues)
Line 61: Line 61:
 
MJPEG stream shows green image in Avigilon, recommendation is to use H.264 for video integration instead.
 
MJPEG stream shows green image in Avigilon, recommendation is to use H.264 for video integration instead.
 
 
=== MTN-3477 Upgrading station firmware using the Intercom Management Tool (IMT) may cause false failure report===  
+
=== MTN-3477 Upgrading device firmware using the Intercom Management Tool (IMT) may cause false failure report===  
Sometimes when upgrading stations using the IMT tool, a station might be stuck at 99% during the upgrade process, where after a while it reports that the upgrade failed. The upgrade actually was successful, and the station can be accessed from the station web.
+
Sometimes when upgrading devices using the IMT tool, a device might be stuck at 99% during the upgrade process, where after a while it reports that the upgrade failed. The upgrade was successful, and the station can be accessed from the station web.
  
  
 
[[Category: Release notes]]
 
[[Category: Release notes]]

Revision as of 07:38, 5 October 2021

Release info

This document provides the release notes for VSF-Fortitude8 6.4 with incremental bug fix releases. The release notes for VSF-Fortitude8 6.4 describe new features, improvements and issues fixed after VSF-Fortitude8 6.2.3.1.

Name: VSF-Fortitude8
Description: VSF-Fortitude8 is a firmware for Turbine Video Plus Intercom including the following devices: TCIV-2+, TCIV-3+, TCIV-5+, TCIV-6+, TKIV+ and TMIV-1+

The firmware is delivered in two different files:

  • vsff8-6.4.3.x - Used for standard in-field upgrades
  • vsff8-prod-6.4.3.x - Used in production- and recovery upgrades.

Version: 6.4.3.0
Date: 05.10.2021
Status: General Availability
Compatibility: Turbine Video Plus intercom is compatible with Edge, SIP, ICX-AlphaCom and AlphaCom systems.



VSF-FORTITUDE8 6.4.3.0

New Features

DRES-43 ONVIF audio backchannel

All devices which support ONVIF, with the exception of TCIV, now support the ONVIF audio backchannel. This enables the ONVIF VMS client to send audio to the Zenitel IP device.

DRES-5 Call statuses reported as DeviceIO in ONVIF

Devices now support reporting the following states as input signals through DeviceIO in ONVIF:

  • In Conversation
  • Ringing (outgoing and incoming)
  • In call queue (ICX-AlphaCom mode only)

This behaviour is disabled by default and needs to be enabled through device web first.

Improvements

DRES-68 Exigo mode removed from device web

The Exigo mode option is removed from the main setting on device web. If the device is upgraded in Exigo mode, it will still stay in Exigo mode. But it cannot change back to Exigo mode after another mode has been selected and applied on the device web.


Issues fixed

MTN-3475 X-Zenitel-License-Request header is now removed when device is in SIP mode

This header was not necessary in SIP mode and it could cause incompatibilities with some 3rd party SIP systems.

MTN-3433 RTSP option "Microphone after AEC" is now working

RTSP option "Microphone after AEC" has now been fixed to work.

MTN-3423 Tone volume -1 disables tone

On web interface for Tone volume, value -1 would not mute tones as intended, it would play it at -1 dBFS instead. This is now fixed, and value -1 mutes tones.

MTN-3333 GPIO configuration change doesn't cause reboot loop anymore

Fixed issue where changing relay mode configuration in Onvif Device Manager would cause device to go in reboot loop.


Known Issues

SUN-476 HTTP MJPEG stream has color distortions when viewed in LenelS2 OnGuard

HTTP MJPEG stream has color distortions when viewed in LenelS2 OnGuard, recommendation is to use RTSP H.264 for video integration instead.

SUN-349 MJPEG stream shows green image in Avigilon

MJPEG stream shows green image in Avigilon, recommendation is to use H.264 for video integration instead.

MTN-3477 Upgrading device firmware using the Intercom Management Tool (IMT) may cause false failure report

Sometimes when upgrading devices using the IMT tool, a device might be stuck at 99% during the upgrade process, where after a while it reports that the upgrade failed. The upgrade was successful, and the station can be accessed from the station web.