Actions

Difference between revisions of "Volume and handset override (Edge)"

From Zenitel Wiki

(Created page with "{{E}} '''Volume and handset override''' is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by...")
 
Line 2: Line 2:
 
'''Volume and handset override''' is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for all types of IP stations.
 
'''Volume and handset override''' is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for all types of IP stations.
  
*In Pulse mode, the Volume and handset override is activated by the [[Pulse_Configuration#Group_Call|Group Call]] feature with Emergency priority (All Call 84 by default).
+
*In Pulse mode, the Volume and handset override is activated by the [[Group Call (Edge)]] feature with Emergency priority (All Call 84 by default).
 
*In SIP mode, the Volume and handset override can be activated when receiving [[Multicast Paging (SIP)|Multicast Paging]] by setting the Priority =  Emergency.
 
*In SIP mode, the Volume and handset override can be activated when receiving [[Multicast Paging (SIP)|Multicast Paging]] by setting the Priority =  Emergency.
  
 
[[Category: IC-EDGE Configuration]]
 
[[Category: IC-EDGE Configuration]]

Revision as of 13:54, 16 September 2019

Edge-icon.jpg

Volume and handset override is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for all types of IP stations.

  • In Pulse mode, the Volume and handset override is activated by the Group Call (Edge) feature with Emergency priority (All Call 84 by default).
  • In SIP mode, the Volume and handset override can be activated when receiving Multicast Paging by setting the Priority = Emergency.