Difference between revisions of "WK20 - 20W Power Amplifier"
From Zenitel Wiki
| Line 12: | Line 12: | ||
==Connectors and Switches== | ==Connectors and Switches== | ||
| − | [[Image:FIG WK20.PNG|left|600px|thumb| | + | [[Image:FIG WK20.PNG|left|600px|thumb|''Connectors and switches on Power Amplifier'']] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 11:00, 16 December 2015
Contents
Highlights
- Designed to amplify the audio of an ASLT subscriber line
- Can be used standalone (speaker only), or in combination with a station to amplify the speaker signal
- Connects directly to the ASLT subscriber line
- Provides 20 Watt into 4 Ohm or 6 Watt into 20 Ohm
- Powered by 24VAC transformer or 24-36VDC power supply
Additional Documentation
For more documentation please see http://www.zenitel.com/product/product/wk20
Connectors and Switches
WK20 and IP Stations
The amplifier can also be used with IP stations, connecting the line output of the IP station to the input of amplifier. Note that when used with IP stations the output power will be less than specified in the table below, because the input of the amplifier is designed for ASLT line levels (2.2 volt nominal, max 8 volts) and the line level from the IP stations is 0dBm signal (approx. 0.77 volts).