Difference between revisions of "WK20 - 20W Power Amplifier"
From Zenitel Wiki
(New page: ==Power Amplier 1000614100== ===Features=== * Output for 1 amplified loudspeaker * Output level control. ===Description=== The schematics for the board are in Chapter 23 from page 273 onwa...) |
|||
| Line 11: | Line 11: | ||
The amplifier may be constantly on, or switched on and off by the M-key on the calling station. It is recommended that power to the amplifier board is supplied from a separate class II transformer. <br\> In the AlphaCom exchange, brackets must be mounted on the board, in order to fasten to the mounting rail. | The amplifier may be constantly on, or switched on and off by the M-key on the calling station. It is recommended that power to the amplifier board is supplied from a separate class II transformer. <br\> In the AlphaCom exchange, brackets must be mounted on the board, in order to fasten to the mounting rail. | ||
| + | |||
| + | ===Connectors and Switches=== | ||
| + | Connectors and Switches.jpg | ||
Revision as of 11:09, 6 August 2007
Power Amplier 1000614100
Features
- Output for 1 amplified loudspeaker
- Output level control.
Description
The schematics for the board are in Chapter 23 from page 273 onwards.
The board contains a power amplifier, a potentiometer for adjusting the output volume and an input for switching the amplifier on/off.
The symetrical input is matched to the output level on the subscriver board in the AlphaCom exchange.
The amplifier may be constantly on, or switched on and off by the M-key on the calling station. It is recommended that power to the amplifier board is supplied from a separate class II transformer. <br\> In the AlphaCom exchange, brackets must be mounted on the board, in order to fasten to the mounting rail.
Connectors and Switches
Connectors and Switches.jpg