Difference between revisions of "WK20 - 20W Power Amplifier"
From Zenitel Wiki
| Line 41: | Line 41: | ||
|} | |} | ||
Table 13-5: Specifications Power Amplifier | Table 13-5: Specifications Power Amplifier | ||
| − | |||
| − | |||
| − | |||
Revision as of 11:40, 6 August 2007
Contents
Power Amplier 1000614100
Features
- Output for 1 amplified loudspeaker
- Output level control.
Description
The schematics for the board are in Chapter 23 from page 273 onwards.
The board contains a power amplifier, a potentiometer for adjusting the output volume and an input for switching the amplifier on/off.
The symetrical input is matched to the output level on the subscriver board in the AlphaCom exchange.
The amplifier may be constantly on, or switched on and off by the M-key on the calling station. It is recommended that power to the amplifier board is supplied from a separate class II transformer. <br\> In the AlphaCom exchange, brackets must be mounted on the board, in order to fasten to the mounting rail.
Connectors and Switches
<br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\>
Technical Specifications
| Text | Value |
|---|---|
| Order Number: | 1000614100 |
| Input signal level | 1 V - 10 V |
| Input impedance | 6kOhm |
| Output power<br\><br\> | 20 W into 4ohm<br\>12 W into 8 ohm<br\>6 W into 20 ohm |
| Frequency range | 140 - 20,000Hz |
| Max. amplification | 10.5 dB |
| Recommended room temperature<br\> | 0'C to +35'C<br\>+32'F to + 95'F |
| Humidity Range<br\>(non-condensing): | 10% - 90% RH<br\> |
| Dimensions W x H x D<br\> | 75mm x 84 mm x 40 mm<br\>2.9" x 3.3" x 1.6" |
Table 13-5: Specifications Power Amplifier