Difference between revisions of "Weather and Vandal Resistant IP Substation - 1008041100"
From Zenitel Wiki
(→Configuration) |
|||
| Line 6: | Line 6: | ||
==Configuration== | ==Configuration== | ||
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure. | The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure. | ||
| + | |||
| + | General configuration: | ||
* [[IP Station Configuration - AlphaCom mode]] | * [[IP Station Configuration - AlphaCom mode]] | ||
* [[SIP Intercom Configuration|IP Station Configuration - SIP mode]] | * [[SIP Intercom Configuration|IP Station Configuration - SIP mode]] | ||
* [[IP Station Configuration - Pulse mode]] | * [[IP Station Configuration - Pulse mode]] | ||
| + | |||
| + | |||
| + | Station specific configuration: | ||
| + | * [[Address Book|Configuration of the Address Book]] | ||
== Restore Factory Defaults and Software Upgrade == | == Restore Factory Defaults and Software Upgrade == | ||
Revision as of 09:21, 23 August 2019
Contents
Connections
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
General configuration:
- IP Station Configuration - AlphaCom mode
- IP Station Configuration - SIP mode
- IP Station Configuration - Pulse mode
Station specific configuration:
Restore Factory Defaults and Software Upgrade
- Reset to factory settings
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)