Difference between revisions of "Weather and Vandal Resistant IP Substation - 1008041100"

Revision as of 14:18, 19 November 2020

Connections

Intercom connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as from AlphaCom version 10.20

Related information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-[[image:80411 RS.jpg|right|250px|IP Sub - Euro]]
+{{AEPS}}
+[[image:80411 CC.PNG|right|175px|IP Substation, item 1008041100]]
+== Connections ==
+* [[IP Sub Connections|Intercom connections]]
-===<u>Highlights</u>===
+==Configuration==
-* Weather and vandal resistant
+The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
-* Designed in stainless steel (A304) to withstand corrosion
+* [[IP Station Configuration - ICX-AlphaCom mode]]
-* Integrated data switch with advanced networking and security functions
+* [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
-* Relay output for remote control, e.g. doors, signal lamps and gates
+* [[SIP Intercom Configuration|IP Station Configuration - SIP mode]]
-* Powered from the IP network cable using Power over Ethernet (PoE)
+* [[IP Station Configuration - Pulse mode]]
-===<u>[[IP Sub Connections|InterCom connections]]</u>===
+== Restore Factory Defaults and Software Upgrade ==
+* [[INCA Station Restore Factory Defaults|Reset to factory settings]]
+* [[INCA Station Software upgrade|Upgrade via the station web interface]]
+* [[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
+* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
-===<u>[[IP Station Configuration]]</u>===
+== Connectors, Indicators and Dimensions ==
+*[[INCA Substation Board Connectors|Board Connectors]]
-===<u>[[INCA Station Software upgrade|Software Upgrade]]</u>===
-===<u>LED Indications</u>===
 * [[INCA Substation LED Indicators|Station LED Indications]]
 * [[INCA Substation PCB LED Indicators|PCB LED Indications]]
+*[[IP Substation Dimensions & Mounting Instructions|Dimensions]]
-===<u>[[INCA Substation Board Connectors|Board Connectors]]</u>===
+== Accessories ==
+* [[Back box flush mount - 1008098100]]
-===<u>[[IP Substation Dimensions & Mounting Instructions|Dimensions]]</u>===
+* [[Back box on wall mount - 1008098000]]
-===<u>[[INCA Station Restore Factory Defaults|Reset to factory settings]]</u>===
-===<u>[http://www.zenitel.com/product/ip-vandal-resistant-substation-0 Additional Documentation on Zenitel.com]</u>===
-[[Category: INCA Stations]]
+== Software Requirements ==
+This station is fully supported as from AlphaCom version 10.20
+== Related information ==
+* [http://www.zenitel.com/product/ip-vandal-resistant-substation-0 Additional Documentation on Zenitel.com]
 [[Category: INCA Stations]]