Weather and Vandal Resistant IP Substation - 1008041100

Features

• Designed to deliver CCoIP® - Critical Communication over IP
• Weather and vandal resistant
• One vandal proof direct call button
• Station electronics available as kit for custom design
• Superb audio quality through wide bandwidth codec and high quality, high output power amplifier
• Integrated Web server
• Remote software upgrade, configuration and monitoring
• Line monitoring
• Dual Ethernet ports for daisy chaining IP stations or connection of other IP devices
• Possible connection to external IP video camera
• One relay output for door lock control or flash strobe light etc.
• External call button option

Description

The STENTOFON Weather Resistant IP Substation is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance.

Designed for CCoIP® the station offers a set of critical communication features such as integrated firewall, group call, call priority and override, to name just a few. This enables you to deliver instant, efficient and secure voice and data services in an IP environment.

The station provides superb wideband audio quality. If even higher audio volume is required, it is possible to interface the unit to an external power amplifier.

The station has one relay and one logical output. These outputs can, for instance, be used to open a door through a connected relay. The operation of the outputs is programmable and controlled by the AlphaCom E exchange.

Further still, the station integrates into any AlphaCom E and upgraded AlphaCom solution, and is scalable from 2 to 1000’s of stations.

Specifications

Dimensions: (WxHxD)	180 x 92 x 46 mm
Weight	0.8 kg
Protection	Vandal resistant design, 2 mm stainless steel front, tamper proof loudspeaker grill, button and fastening screws
Protection Class	With mounting box 1008098000 (on wall): IP-44 With mounting box 1008098100 (flush mount):IP-55
Mounting	Flush mount in 50 mm deep back box
Temperature	-40˚C to +55˚C
Relative humidity	0% - 95%
Power	Power over Ethernet, IEEE 802.3 a-f, Class 0 Local power 19-27 VDC, Idle 4W, max. 8W
Connectors	2 x RJ45 (Ethernet) 10-100 Mbps Pluggable screw terminals (audio and I/O)
Remote control Max. switching capacity Max. voltage relay Max. current relay	3 digital inputs, 1 relay output and one logical output 30W DC 60VDC 1A DC
SIP	RFC 3261, SIP Info (Cisco), RFC 2833 (DTMF)
IP Protocols	IP v4 - TCP - UDP - HTTPS - TFTP - RTP - RTPC - DHCP - SNMP - DiffServ - TOS - STENTOFON CCoIP® - SIP
LAN Protocols	Power over Ethernet (IEEE 802.3 a-f), VLAN (IEEE 802.1pq)*, Network Access Control (IEEE 802.1x)*, STP (IEEE 802.1d), RSTP (IEEE 802.1d-2004)
Audio Technology	Wideband 200 Hz - 7 kHz (G.722) Telephony 3.4kHz (G.711) Active noise filtering Acoustic echo cancellation Open duplex Adaptive jitter filter 1.5 Watt audio output 8 ohm loudspeaker impedance External audio out (0db, 600 ohm)
Management and Operation	HTTPS (Web configuration) DHCP and static IP Remote automatic software upgrade Centralized monitoring Status LED
Advanced features	Dual port managed data switch supporting VLAN and network access control
Compliance	CE and FCC Part 15

* Not supported in STENTOFON Pulse Mode

Installation

See article: IP Station Installation

Station Board Connectors and LED Indications

See article: IP Station Board Connections and Indications

IP Station Configuration

See article: IP_Station_Configuration#Configuration_in_IP-StationWeb

Reset to factory settings

See article: IP Station Restore Factory Defaults

Software Upgrade

See article: IP Station Software upgrade

Dimensions

See article: IP Stations Dimensions and Mounting Instructions