Actions

Difference between revisions of "Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000"

From Zenitel Wiki

(→‎Indications)
(→‎Connections)
Line 63: Line 63:
 
|}
 
|}
 
  * Not supported in STENTOFON Pulse Mode
 
  * Not supported in STENTOFON Pulse Mode
−
 
−
== Connections ==
 
−
[[Image:IP substation connections.jpg|280px|right|IP Substation Connections]]
 
−
There are four connectors on the IP substation board, P1-P4.
 
−
 
−
{|
 
−
|-
 
−
|width="50pt" valign="top" |'''P1''':
 
−
|width="300pt"|RJ45 connector for LAN connection.
 
−
|-
 
−
| colspan="2" | The station can be powered from this connection if the line supports Power over Ethernet (PoE).
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
|valign="top"|'''P2''': || RJ45 connector for auxiliary LAN equipment like TV camera, PC or a second IP station.
 
−
|-
 
−
| colspan="2" | This port has not an individual IP address or power for aux equipment.
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
|'''P3''': || 6-pin plug-on screw terminal for external connections.
 
−
|-
 
−
|''Pin 1/2'': || Connect 24 VDC for station power if power is not distributed via LAN. Pin 1 is positive.
 
−
|-
 
−
|''Pin 3/4'': || Internal NO (Normal Open) relay contact for door lock control etc.
 
−
|-
 
−
|''Pin 5/6'': || Normally connected to station loudspeaker. May be used for 16-20 ohm/2 W external loudspeaker in parallel.
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
|'''P4''': || 6-pin plug-on screw terminal for internal connections.
 
−
|-
 
−
| ''Pin 1/4'': || Call button no. 1.
 
−
|-
 
−
| ''Pin 2/4'': || Call button no. 2 if included
 
−
|-
 
−
| ''Pin 3/4'': || Call button no. 3 if included
 
−
|-
 
−
| ''Pin 5/6'': || Station LED for call and message info.
 
−
|-
 
−
| colspan="2" |  
 
−
|-
 
−
| valign="top"|'''TP1/2''': || Optional external audio output.
 
−
|-
 
−
| colspan="2" | This is a 0 dB, 600 ohm balanced output for connection to a power amplifier. Note that the amplifier input MUST HAVE AN INSULATED INPUT (trafo, capacitors, etc.).
 
−
|-
 
−
|}
 
−
 
  
 
== Mounting ==
 
== Mounting ==

Revision as of 09:21, 9 May 2012

8051 RS.jpg

Features

  • Designed to deliver CCoIP® - Critical Communication over IP
  • Weather and vandal resistant flush-mount design
  • One vandal proof direct call button
  • Station electronics available as kit for custom design
  • Superb audio quality through wide bandwidth codec and high quality, high output power amplifier
  • Integrated Web server
  • Remote software upgrade, configuration and monitoring
  • Line monitoring
  • Dual Ethernet port for daisy chaining IP stations or connection of other IP devices
  • Possible connection to external IP video camera
  • One relay output for door lock control or flash strobe light etc.
  • External call button option

Description

The STENTOFON weather and vandal resistant IP substation is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance.

Designed for CCoIP® the station offers a set of critical communication features such as integrated firewall, group call, call priority and over-ride, to name just a few. This enables you to deliver instant, efficient and secure voice and data services in an IP environment.

The station provides superb wideband audio quality. If even higher audio volume is required, it is possible to interface the unit to an external power amplifier.

The station has one relay and one logical output. These outputs can, for instance, be used to open a door through a connected relay. The operation of the outputs is programmable and controlled by the AlphaCom E exchange.

Further still, the station integrates into any AlphaCom E and upgraded AlphaCom solution, and is scalable from 2 to 1000’s of stations.

Specifications

Dimensions: (WxHxD) 160 x 114 x 63 mm
Weight 0.8 kg
Protection Vandal resistant design, 2 mm stainless steel front, tamper proof loudspeaker grill, button and fastening screws
Protection Class With mounting box 1008098300: IP-65
Mounting Flush mount in 3-gang back box, 3 1/2 inch deep
Temperature -40˚C to +55˚C
Relative humidity 0% - 95%
Power Power over Ethernet, IEEE 802.3 a-f, Class 0
Local power 19-27 VDC, Idle 4W, max. 8W
Connectors 2 x RJ45 (Ethernet) 10-100 Mbps
Pluggable screw terminals (audio and I/O)
Remote control
Max. switching capacity
Max. voltage relay
Max. current relay		 3 digital inputs, 1 relay output and one logical output
30W DC
60VDC
1A DC
SIP RFC 3261, SIP Info (Cisco), RFC 2833 (DTMF)
IP Protocols IP v4 - TCP - UDP - HTTPS - TFTP - RTP - RTPC - DHCP - SNMP - DiffServ - TOS - STENTOFON CCoIP® - SIP
LAN Protocols Power over Ethernet (IEEE 802.3 a-f), VLAN (IEEE 802.1pq)*, Network Access Control (IEEE 802.1x)*, STP (IEEE 802.1d), RSTP (IEEE 802.1d-2004)
Audio Technology Wideband 200 Hz - 7 kHz (G.722)
Telephony 3.4kHz (G.711)
Active noise filtering
Acoustic echo cancellation
Open duplex
Adaptive jitter filter
1.5 Watt audio output
8 ohm loudspeaker impedance
External audio out (0db, 600 ohm)
Management and Operation HTTPS (Web configuration)
DHCP and static IP
Remote automatic software upgrade
Centralized monitoring
Status LED
Advanced features Dual port managed data switch supporting VLAN and network access control
Compliance CE and FCC Part 15 
* Not supported in STENTOFON Pulse Mode

Mounting

The station mounts in the 3 Gang Flush Mount Back Box 1008098300.

Retrieved from "https://wiki.zenitel.com/w/index.php?title=Weather_and_Vandal_Resistant_IP_Substation_for_3_gang_Back_Box_-_1008051000&oldid=36678"