Actions

Difference between revisions of "Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000"

From Zenitel Wiki

(Flush Mount Back Box)
(Restore Factory Defaults and Software Upgrade)
(31 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[image:Weather and Vandal Resistant IP Substation for 3 gang Back Box 100 8051 000.jpg|thumb|150px|]]
+
{{APS}}
 +
[[image:8051 RS.jpg|right|250px|IP Substation, item 1008051000]]
 +
== Connections ==
 +
* [[IP Sub Connections|Intercom connections]]
  
== Features ==
+
==Configuration==
* Designed to deliver CCoIP® - Critical Communication over IP
+
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
* Weather and vandal resistant flush-mount design
+
* [[IP Station Configuration - AlphaCom mode]]
* One vandal proof direct call button
+
* [[SIP Intercom Configuration|IP Station Configuration - SIP mode]]
* Station electronics available as kit for custom design
+
* [[IP Station Configuration - Pulse mode]]
* Superb audio quality through wide bandwidth codec and high quality, high output power amplifier
 
* Integrated Web server
 
* Remote software upgrade, configuration and monitoring
 
* Line monitoring
 
* Dual Ethernet port for daisy chaining IP stations or connection of other IP devices
 
* Possible connection to external IP video camera
 
* One relay output for door lock control or flash strobe light etc.
 
* External call button option
 
  
== Description ==
+
== Restore Factory Defaults and Software Upgrade ==
The STENTOFON weather and vandal resistant IP substation is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance.
+
* [[INCA Station Restore Factory Defaults|Reset to factory settings]]
 +
* [[INCA Station Software upgrade|Upgrade via the station web interface]]
 +
* [[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
 +
* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
  
Designed for CCoIP® the station offers a set of critical communication features such as integrated firewall, group call, call priority and over-ride, to name just a few. This enables you to deliver instant, efficient and secure voice and data services in an IP environment.
+
== Connectors, Indicators and Dimensions ==
 +
*[[INCA Substation Board Connectors|Board Connectors]]
 +
* [[INCA Substation LED Indicators|Station LED Indications]]
 +
* [[INCA Substation PCB LED Indicators|PCB LED Indications]]
 +
* [[IP 3-gang Substation Dimensions & Mounting Instructions|Dimensions]]
  
The station provides superb wideband audio quality. If even higher audio volume is required, it is possible to interface the unit to an external power amplifier.
+
== Accessories ==
 +
* [[Backbox 3 Gang - 1008098300]]
  
The station has one relay and one logical output. These outputs can, for instance, be used to open a door through a connected relay. The operation of the outputs is programmable and controlled by the AlphaCom E exchange.
+
== Related information ==
 +
* [http://www.zenitel.com/product/ip-vandal-resistant-substation Additional Documentation on Zenitel.com]
  
Further still, the station integrates into any AlphaCom E and upgraded AlphaCom solution, and is scalable from 2 to 1000’s of stations.
+
[[Category: INCA Stations]]
 
 
== Specifications ==
 
[[Image:80510 - Specifications.PNG|800px|IP Sub 80510 Specifications]]
 
 
 
== Connections ==
 
[[Image:IP substation connections.jpg|280px|right|IP Substation Connections]]
 
There are four connectors on the IP substation board, P1-P4.
 
 
 
{|
 
|-
 
|width="50pt" valign="top" |'''P1''':
 
|width="300pt"|RJ45 connector for LAN connection.
 
|-
 
| colspan="2" | The station can be powered from this connection if the line supports Power over Ethernet (PoE).
 
|-
 
| colspan="2" |  
 
|-
 
|valign="top"|'''P2''': || RJ45 connector for auxiliary LAN equipment like TV camera, PC or a second IP station.
 
|-
 
| colspan="2" | This port has not an individual IP address or power for aux equipment.
 
|-
 
| colspan="2" |  
 
|-
 
|'''P3''': || 6-pin plug-on screw terminal for external connections.
 
|-
 
|''Pin 1/2'': || Connect 24 VDC for station power if power is not distributed via LAN. Pin 1 is positive.
 
|-
 
|''Pin 3/4'': || Internal NO (Normal Open) relay contact for door lock control etc.
 
|-
 
|''Pin 5/6'': || Normally connected to station loudspeaker. May be used for 16-20 ohm/2 W external loudspeaker in parallel.
 
|-
 
| colspan="2" |  
 
|-
 
|'''P4''': || 6-pin plug-on screw terminal for internal connections.
 
|-
 
| ''Pin 1/4'': || Call button no. 1.
 
|-
 
| ''Pin 2/4'': || Call button no. 2 if included
 
|-
 
| ''Pin 3/4'': || Call button no. 3 if included
 
|-
 
| ''Pin 5/6'': || Station LED for call and message info.
 
|-
 
| colspan="2" |  
 
|-
 
| valign="top"|'''TP1/2''': || Optional external audio output.
 
|-
 
| colspan="2" | This is a 0 dB, 600 ohm balanced output for connection to a power amplifier. Note that the amplifier input MUST HAVE AN INSULATED INPUT (trafo, capacitors, etc.).
 
|-
 
|}
 
 
 
 
 
== Mounting ==
 
The station mounts in the 3 Gang Flush Mount Back Box 1008098300.
 
 
 
[[image:Weather and Vandal Resistant IP Substation for 3 gang Back Box 100 8051 000 Flush mount back box.jpg|thumb|left|250px|]]<br>
 
[[Category: Stations]]
 
[[Category: Vandal Resistant Stations]]
 
[[Category: IP Stations]]
 

Revision as of 11:44, 6 September 2017

APS.png
IP Substation, item 1008051000

Connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Related information