Actions

Difference between revisions of "Turbine 4.11 - Release notes"

From Zenitel Wiki

(Known Issues - VSF-Turbine 4.9.3.1)
(Known Issues - VSF-Turbine 4.9.3.0)
Line 21: Line 21:
 
==Known Issues ==
 
==Known Issues ==
  
==Known Issues - VSF-Turbine 4.9.3.0 ==
 
=== MTN-598 IP station fails to register if Hebrew name is too long ===
 
More than 12 characters entered causes registration problems
 
 
=== MTN-1077 Lamp test not functioning on ECPIR-3P and belonging EBMDR-8 ===
 
Alphacom DAK Lamp test (feature 7874) not implemented on DAK Panel ECPIR-3P and belonging EBMDR-8
 
 
=== MTN-1073 Group call fails if system previously configured with ZAP ===
 
If system was configured with ZAP (VS-IMT Pulse SDK project) and then switched to XML configuration by deleting data.lua file, it is possible that Group Calls shall not work. A workaround is that (1) data.lua file is deleted from all stations including Pulse server - this will reboot stations, and (2) after reboot go to Server configuration -> Save + Apply - this will again reboot all stations.
 
 
=== MTN-268 Relay follow M-key cannot handle quick M ===
 
Relay configured to follow M-key does not handle quick press on M-key
 
 
=== MTN-1503 Changing the Detailed Logging setting disables syslog logging ===
 
If Detailed Logging is enabled or disabled, the syslog functionality doesn't work - Turbine log messages do not arrive on the syslog server. Workaround: Changing Log level setting for syslog will enable the syslog logging again
 
 
=== VSIS-878 Factory reset does not delete uploaded Script ===
 
All uploaded scripts should also be removed on Factory reset
 
 
=== SNOW-579 TFIE-6 does not display AlphaCom status-messages in Idle ===
 
There is no way of knowing if a TFIE-6 is for example forwarded(71,72) or marked absent(77x). Workaround: During commissioning it is possible by Class Of Service programming in AlphaCom to deny access to these services for the TFIE-6
 
  
  

Revision as of 15:15, 9 January 2019

Release info

Name: VSF-Turbine
Description: VSF-Turbine is a firmware archive for all Turbine Family Intercom stations including devices: TCIS-x, TKIS-2, TCIV-x, TMIS-x, TFIE-x, TKIE-x, TFIX-x, ECPIR-3P, ENA-2060AC (only in SIP mode), Exigo IP speakers and Exigo Network Amplifiers (AlphaCom mode only).
Version: The firmware is delivered in two different ZIP archives:

  • vsft-4.11.2.x - Used for standard in-field upgrades
  • vsft-prod-4.11.2.x - Used in production- and recovery upgrades.

Version: 4.11.2.5
Date: 15.01.2019
Status: Limited Availability

VSF-TURBINE 4.11.2.5

New Features - Turbine Intercom

New Features - Exigo Network Amplifiers

Technical Preview

Bugfixes and Improvements

Known Issues