Difference between revisions of "Door opening"
From Zenitel Wiki
| Line 10: | Line 10: | ||
* [[Configuration_guide_for_AudioCodes_MP114/118,_v6.2_and_higher#Door_Opening_Feature|Door Opening through AudioCodes]] | * [[Configuration_guide_for_AudioCodes_MP114/118,_v6.2_and_higher#Door_Opening_Feature|Door Opening through AudioCodes]] | ||
* [[SIP_trunk_node_-_configuration#Door_Opening_Feature|Door Opening through SIP Trunk]] | * [[SIP_trunk_node_-_configuration#Door_Opening_Feature|Door Opening through SIP Trunk]] | ||
| − | * [[ | + | * [[RCO - Remote Control Output|Map RCO to IP Station]] |
* [[Turbine Configuration#I.2FO_Settings|Turbine I/O Settings]] | * [[Turbine Configuration#I.2FO_Settings|Turbine I/O Settings]] | ||
* [[Door Opening using Dummy Number (Event Handler)]] | * [[Door Opening using Dummy Number (Event Handler)]] | ||
Revision as of 12:24, 5 May 2022
Door opening is a feature triggered by pressing digit 6 during conversation with the door station. When pressing the digit, a RCO is triggered for 3,5 seconds (programmable from AlphaPro, Exchange & System -> Systems -> Timers -> RCO Pulse (Door Open) Time). The RCO output operates a relay on a Zenitel IP device, to which the door magnet (or an input in the access control system) is connected.
Related Articles:
- Door Opening and Code Lock - practice with solution
- Door Opening - Configuration example
- Door Opening - During Conversation (Event Type)
- Door Opening - Automatick Lock (Event Type)
- Door Opening through AudioCodes
- Door Opening through SIP Trunk
- Map RCO to IP Station
- Turbine I/O Settings
- Door Opening using Dummy Number (Event Handler)
- Door opening of Ring Master stations from AlphaCom
- AlphaCom/M100 Integration - Door Opening