Actions

Difference between revisions of "Door opening"

From Zenitel Wiki

Line 11: Line 11:
 
* [[SIP_trunk_node_-_configuration#Door_Opening_Feature|Door Opening through SIP Trunk]]
 
* [[SIP_trunk_node_-_configuration#Door_Opening_Feature|Door Opening through SIP Trunk]]
 
* [[RCO - Remote Control Output|Map RCO to IP Station]]
 
* [[RCO - Remote Control Output|Map RCO to IP Station]]
* [[Turbine Configuration#I.2FO_Settings|Turbine I/O Settings]]
+
* [[Station_Web_Interface_-_ICX-AlphaCom_mode#I.2FO_Settings|Setting Turbine I/O to an Output]]
 
* [[Door Opening using Dummy Number (Event Handler)]]
 
* [[Door Opening using Dummy Number (Event Handler)]]
 
* [[Door opening of Ring Master stations from AlphaCom]]
 
* [[Door opening of Ring Master stations from AlphaCom]]

Revision as of 12:30, 5 May 2022

AI.png

Door opening is a feature triggered by pressing digit 6 during conversation with the door station. When pressing the digit, a RCO is triggered for 3,5 seconds (programmable from AlphaPro, Exchange & System -> Systems -> Timers -> RCO Pulse (Door Open) Time). The RCO output operates a relay on a Zenitel IP device, to which the door magnet (or an input in the access control system) is connected.


Related Articles: