Difference between revisions of "IP Desktop Station with Video Display - 1408001635"
From Zenitel Wiki
(→Accessories) |
|||
Line 9: | Line 9: | ||
General configuration. | General configuration. | ||
* [[IP Station Configuration - AlphaCom mode]] | * [[IP Station Configuration - AlphaCom mode]] | ||
+ | * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]] | ||
* [[SIP Intercom Configuration|IP Station Configuration - SIP mode]] | * [[SIP Intercom Configuration|IP Station Configuration - SIP mode]] | ||
* [[IP Station Configuration - Pulse mode]] | * [[IP Station Configuration - Pulse mode]] |
Revision as of 09:55, 6 December 2019
Contents
Getting Started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
General configuration.
- IP Station Configuration - AlphaCom mode
- IP Station Configuration - Edge mode
- IP Station Configuration - SIP mode
- IP Station Configuration - Pulse mode
Station specific configuration for the IP Desktop Station with Video Display:
Restore Factory Defaults and Software Upgrade
- Reset the intercom station to factory default settings
- Reset the Video Module to factory default settings
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Software Upgrade of the Video Module
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
Accessories
Software Requirements
This station is fully supported as form AlphaCom version 11.2.3.4.